I offer here the base plate with cradle of the 380 mm gun turret Bruno for the battleships Bismarck and Tirpitz in 1/100 scale. The base plate fits exactly into the different 380 mm turret hoods from my store. These parts were made after construction drawings and original pictures.
In the base plate are openings for a motor which can then turn the turret via a gear rim in the barbette.
In the cradle are the bearings of the rotation axis 2 parts so that the gun barrels can also be installed movable.
In my store there is also the turret hood For turret Bruno with flak platform
https://www.shapeways.com/product/WCS3F6TWL
as well as the turret hoods for Caesar and Dora.
https://www.shapeways.com/product/K9G4P4CCL
There is also the version without rangefinder for Turm Anton.
https://www.shapeways.com/product/DWZ3TTC4K
All turret hoods fit on the base plate.
The shotboxes with tubes are also available in my store. These are drawn with ammunition chute and latches.
https://www.shapeways.com/product/KPMK54DQK
Also the barbettes are available including gear rim in the 2 heights for the turrets in my store.
low
https://www.shapeways.com/product/8WGK6AJQ8
high
https://www.shapeways.com/product/8X5QXGXLY
The grating and ammo boxes for the 20 mm C/38 quadruple flak are also available in my store.
https://www.shapeways.com/product/HM5UFLZCF
These are simply attached to the platform.
The 20 mm C/38 Vierlingsflak is also available in my store including Penestralsockel.
https://www.shapeways.com/product/DN32FPYBF
Ich biete hier die Grundplatte mit Wiege des 380 mm Geschützturm Bruno für die Schlachtschiffe Bismarck und Tirpitz im Maßstab 1/100 an. Die Grundplatte passt genau in die verschiedenen 380 mm Turmhauben aus meinem Shop. Diese Teile wurden nach Konstruktionszeichnungen und Orginalbildern erstellt.
In der Grundplatte sind Öffnungen für einen Motor der dann über einen Zahnkranz in der Barbette den Turm drehen kann.
In der Wiege sind die Lager der Drehachse 2 teilig so das die Geschützrohre auch beweglich eingebaut werden können.
In meinem Shop gibt es auch die Turmhaube Für Turm Bruno mit Flakplattform
https://www.shapeways.com/product/WCS3F6TWL
sowie die Turmhauben für Cäsar und Dora.
https://www.shapeways.com/product/K9G4P4CCL
Auch gibt es die Version ohne Entfernungsmesser für Turm Anton.
https://www.shapeways.com/product/DWZ3TTC4K
Alle Turmhauben passen auf die Grundplatte.
Die Schußkästen mit Rohren gibt es auch in meinem Shop. Diese sind mit Munitionsrutsche und Verschlüssen gezeichnet.
https://www.shapeways.com/product/KPMK54DQK
Auch die Barbetten gibt es inclusive Zahnkranz in den 2 Höhen für die Türme in meinem Shop.
niedrig
https://www.shapeways.com/product/8WGK6AJQ8
hoch
https://www.shapeways.com/product/8X5QXGXLY
Die Gräting und Munitionskästen für die 20 mm C/38 Vierlingsflak sind auch in meinem Shop erhältlich.
https://www.shapeways.com/product/HM5UFLZCF
Diese werden einfach auf die Plattform aufgesteckt.
Die 20 mm C/38 Vierlingsflak ist auch in meinem Shop inclusive Penestralsockel erhältlich.
https://www.shapeways.com/product/DN32FPYBF