NEODiVR "poKet"

This assembly consists of all the pieces to put together your own NEODiVR "poKet" using 'BALS'* technology. The connected via a model tree system and require a X-Acto knife and file/sandpaper to cut and smooth the edges the tree connects to each piece.  You will also need the following components to finish the product:

• 1 ea. 100mm Long 1.5mm Dia Stainless Steel Round Bar (Trim to 98mm)
• 4 ea. 1.5mm Dia 40mm Length Stainless Steel Round Rod (Cut two of these to match the  lens protection lids hinge socket @ 22mm)
• 2 ea. 50mm diameter Fresnel lenses with Focal Length of 45mm
• 1 ea. Thin strip of adhesive felt/neoprene of 70mm on the bottom of the left arm.
• 2 ea. Thin stips of adhesive backed felt/neoprene of 33mm on the bottom of the right arm leaving the center open (Only necessary if you have Galaxy S phone with raised power button, otherwise cut 70mm strip, like above)
• 4 ea. 6mm PVC caps trimmed and attache to each foot, or brush/spray a thick coat of liquid rubber coating.
• GoogleVR QR code 

It is recommended if you choose any color except black, that you paint the sides facing the screen, flat black.

Make sure to finely sand and wipe down each piece before painting.  Also make sure each hinge cavity is thorougly cleaned out from extranous nylon dust.  Use light even pressure since the cavities are thin, especially the hinge area for the lens protectors/blinders.

Here is a link for the images, videos, QR code and a PDF of colored lables to print and cut out to apply to your finished poKet.  Look for an episode of All Things 3D's "3D Tech Closet" on the preparation and assembly of the NEODiVR "poKet."

If you want to purchase a the parts kit to complete these, please contact me.

* Big Ass Lens System