White Natural Versatile Plastic
Tesla Model S - Front Stage 4 lowering link
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$9.28
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Tesla Model S air suspension lowering links (need 2 for both sides)
For 2012-2021 "Legacy" model S. Works with both Nosecone and Facelifted Model S, but will not work with the newer "Palladium"
This is the Stage 4 FRONT lowering link. 58mm in length. Lowers the front suspension a lot. Do not use in the rear.
There are thin "Notches" cut into in the rings that may fuse during printing. These allow easier installation; cut them with a thin knife or razor to allow expansion during install if they have fused on your prints.
For 2012-2021 "Legacy" model S. Works with both Nosecone and Facelifted Model S, but will not work with the newer "Palladium"
This is the Stage 4 FRONT lowering link. 58mm in length. Lowers the front suspension a lot. Do not use in the rear.
There are thin "Notches" cut into in the rings that may fuse during printing. These allow easier installation; cut them with a thin knife or razor to allow expansion during install if they have fused on your prints.
Details
What's in the box:
Front _ 58mm_Lower Stage 4 v3_link
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$70.12
$11.57
$18.92
$132.42
