You must be logged in and verified to contact the designer.
Product Description
This is the complete AMPro double wishbone front suspension arms and uprights for the Tamiya Hornet & Grasshopper. Please note, these are 3D printed and though at AMPro, we have done extensive testing with them (among many other structural 3D printed parts), please be aware that they are not as strong as an injection molded version. That said, our test car has raced with those arms without any issue. Hardware needed to complete the front end is not included. This version will allow you to retain the stock front springs or use vintage You-G/Parma shocks. Just install the metal u-bracket from the stock arm and you are all set! These arms are the same for both sides. Modifications are needed on a Grasshopper body to make this system work. Two upper control link pivots are included. The flat one offers optimal geometry and rigidity but requires to notch the body for the upper link. The other allows the body to remain unmodified but is weaker and compromises geometry. Great for a light runner/shelfer.
PN-045001-00
Video of installation and operation can be found here:
https://youtu.be/gavLbtOwl3w