You must be logged in and verified to contact the designer.
Product Description
Larger sized magnetic fidget spinner caps. Good for ease of holding without touching spinner body. For 8 x 7 x 22mm (608) bearing. The diameter of the caps are 29mm. I found I prefer larger caps personally so here they are.
REQUIRES: 2 cylindrical neodymium magnets 4mm diameter x 4 mm long to be secured with super glue. It is reccomended to press in and test before gluing to make sure magnets are in far enough. remember to check polarity too first they should attract not repel.
The 2 sprues joining caps should just snap off when twisted. It is reccomended that you first seal the finish on the caps with a few light coats of clear acrylic spray (Krylon etc.) this makes cleaning easier and resists grime better.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: