Finished model with knuckle couplers(wheel sets, brake wheel, coupler and brass screw not included.)
Three Pair Nn3 Logging Disconnect Trucks (6 trucks
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$16.03
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Typical narrow gauge disconnect logging trucks.
Disconnect Logging Trucks were used by logging and lumber companies to transport logs from the location in the woods where trees are felled and gathered to sawmills.
To complete, modeler will need to purchase separatly: Micro Trains Line knuckle or link-and-pin couplers, MTL Peacock brake wheels, Fox Valley FVM 091 metal wheel sets, 3/16" or 1/4" brass 00-90 flat head screw. Hole in bolster will require tapping for 00-90 screw.
GENERAL NOTE: This is a craftsman kit consisting primarily of 3D printed acrylic plastic parts. These parts are NOT as strong or flexible as the “engineering” plastics many of you will be used to in railway models, nor even as strong as conventional injection molded styrene. HANDLE THE PARTS CAREFULLY TO AVOID BREAKAGE. Wash the parts in isopropyl alcohol aided by a soft brush. Very thin parts of the kit can be strengthened by applying very small droplets of CA adhesive with the tip of a pin or needle to the back of the thin area after the parts dry.
Disconnect Logging Trucks were used by logging and lumber companies to transport logs from the location in the woods where trees are felled and gathered to sawmills.
To complete, modeler will need to purchase separatly: Micro Trains Line knuckle or link-and-pin couplers, MTL Peacock brake wheels, Fox Valley FVM 091 metal wheel sets, 3/16" or 1/4" brass 00-90 flat head screw. Hole in bolster will require tapping for 00-90 screw.
GENERAL NOTE: This is a craftsman kit consisting primarily of 3D printed acrylic plastic parts. These parts are NOT as strong or flexible as the “engineering” plastics many of you will be used to in railway models, nor even as strong as conventional injection molded styrene. HANDLE THE PARTS CAREFULLY TO AVOID BREAKAGE. Wash the parts in isopropyl alcohol aided by a soft brush. Very thin parts of the kit can be strengthened by applying very small droplets of CA adhesive with the tip of a pin or needle to the back of the thin area after the parts dry.
Details
What's in the box:
Logging Disconnect x6 -181208 (repaired)
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
