Tan Fine Detail Plastic
MiSTer Case Universal v5.x Bottom Shell (2/4)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$112.26
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
MiSTer - Case Universal v5.x - Bottom Shell (Part 2 of 4)
An example of items to be ordered together to assemble a full case:
1x MiSTer Case Universal v5.x Top Shell(1/4) https://www.shapeways.com/product/YE5XSF42N/mister-case-universal-v5-x-top-shell-1-4?optionId=65445488
1x MiSTer Case Universal v5.x Bottom Shell (2/4) (This part)
1x MiSTer - Case Universal v5.x - Front/Back/Plugs(Part 3/4) https://www.shapeways.com/product/4TZS6J62E/mister-case-universal-v5-2-front-back-plugs?optionId=65200339&li=shop-inventory
1x MiSTer Case Universal v5.x ButtonsKit (Part 4/4) https://www.shapeways.com/product/NMCVMDT4U/mister-case-universal-v5-2-buttonskit?optionId=65445844&li=shop-inventory
---
MiSTer - Case Universal v5.x
I remixed the Universal Case for the MiSTer to now support the I/O-Boards 5.2 and 5.5 . I also works with v6.0 I/O-Boards.
The I/O-Board 5.2 now features a second SD-card slot and a protruding SoG switch rendering the older Case Universal 1.2 version obsolete.
The new case has new asymmetric connector points between top and bottom shell. It has new cut-outs for SD-card slot, SoG switch and the a wider VGA connector. The fan now is mounted directly on the I/O-board PCB. Therefore the fan mounts are now omitted. To increase air flow the vents on the top have been drastically enlarged.
To cover the side cut-outs for the SoG and SOD-card slot there are separate plugs available as covers.
Another feature are the three integrated buttons allowing to press the I/O-boards tactile switches while the case is closed. The buttons are printed in place. Should they not move after the print, try using little force to break them free. I tested the print with 0,18mm layer height and 2 outer shells.
For those not interested in external buttons find a top shell file without buttons:
MiSTer_Uni_52_Top_No_Buttons.stl
The original screws of the DE10 Nano can again be used to fix the DE10 Nano inside the case (see pictures). If you find this to be too difficult try using sharp screws to prepare the holes. It works!
Enjoy.
Update - 21.05.2019
Added more clearance for the SD Memory Card Connector on the underside of the DE10.
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewforum.php?f=117
An example of items to be ordered together to assemble a full case:
1x MiSTer Case Universal v5.x Top Shell(1/4) https://www.shapeways.com/product/YE5XSF42N/mister-case-universal-v5-x-top-shell-1-4?optionId=65445488
1x MiSTer Case Universal v5.x Bottom Shell (2/4) (This part)
1x MiSTer - Case Universal v5.x - Front/Back/Plugs(Part 3/4) https://www.shapeways.com/product/4TZS6J62E/mister-case-universal-v5-2-front-back-plugs?optionId=65200339&li=shop-inventory
1x MiSTer Case Universal v5.x ButtonsKit (Part 4/4) https://www.shapeways.com/product/NMCVMDT4U/mister-case-universal-v5-2-buttonskit?optionId=65445844&li=shop-inventory
---
MiSTer - Case Universal v5.x
I remixed the Universal Case for the MiSTer to now support the I/O-Boards 5.2 and 5.5 . I also works with v6.0 I/O-Boards.
The I/O-Board 5.2 now features a second SD-card slot and a protruding SoG switch rendering the older Case Universal 1.2 version obsolete.
The new case has new asymmetric connector points between top and bottom shell. It has new cut-outs for SD-card slot, SoG switch and the a wider VGA connector. The fan now is mounted directly on the I/O-board PCB. Therefore the fan mounts are now omitted. To increase air flow the vents on the top have been drastically enlarged.
To cover the side cut-outs for the SoG and SOD-card slot there are separate plugs available as covers.
Another feature are the three integrated buttons allowing to press the I/O-boards tactile switches while the case is closed. The buttons are printed in place. Should they not move after the print, try using little force to break them free. I tested the print with 0,18mm layer height and 2 outer shells.
For those not interested in external buttons find a top shell file without buttons:
MiSTer_Uni_52_Top_No_Buttons.stl
The original screws of the DE10 Nano can again be used to fix the DE10 Nano inside the case (see pictures). If you find this to be too difficult try using sharp screws to prepare the holes. It works!
Enjoy.
Update - 21.05.2019
Added more clearance for the SD Memory Card Connector on the underside of the DE10.
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewforum.php?f=117
Details
What's in the box:
MiSTer_Uni_52_Bottom_Fix1
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$16.98
$48.90
