Black PA12
Universal Chassis-32mm Front (INL,BX/FL,Sphl bush)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Universal Chassis-32mm Front (INL,BX/FL,Sphl bush)
- Rear uses spherical bushes (Slot It CH56b), see video click here.
- Takes a Boxer/Flat motor (inline config.)
- Chassis width 44mm, can be trimmed down to 26mm.
- Rear ride height adjustment of 1.5mm, using M2 grub screws.
- Wheelbase 95mm (max) & 62mm (min) after trimming.
- Screws needed: M2.2 screws for Body posts & fixing nuts. M2 grub screws for ride height adjustment.
- Front axle ride height adjustment of 2.5mm, using M2 grub screws.
- Front end option to fit Slot it spherical bushes (CH56b) (height adjustment 1.5mm), Please watch video.
- M2 grub screws needed for height adjustment.
- Screw-in guide recommended instead of clip-in guide.
- Motor wire fixing under the front axle.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Front End
1x Rear End
2x Fixing Nuts
2x Body Posts
General Notes:
Colors are slightly more flexible then Black, White is slightly more flexible then colors.
(Ref: JA67)
- Rear uses spherical bushes (Slot It CH56b), see video click here.
- Takes a Boxer/Flat motor (inline config.)
- Chassis width 44mm, can be trimmed down to 26mm.
- Rear ride height adjustment of 1.5mm, using M2 grub screws.
- Wheelbase 95mm (max) & 62mm (min) after trimming.
- Screws needed: M2.2 screws for Body posts & fixing nuts. M2 grub screws for ride height adjustment.
- Front axle ride height adjustment of 2.5mm, using M2 grub screws.
- Front end option to fit Slot it spherical bushes (CH56b) (height adjustment 1.5mm), Please watch video.
- M2 grub screws needed for height adjustment.
- Screw-in guide recommended instead of clip-in guide.
- Motor wire fixing under the front axle.
- Some trimming may be needed due to the nature of 3D printing.
Parts Included:
1x Front End
1x Rear End
2x Fixing Nuts
2x Body Posts
General Notes:
Colors are slightly more flexible then Black, White is slightly more flexible then colors.
(Ref: JA67)
Details
What's in the box:
SPW-Uni-Inl_BX-FL-SB-Chassis-32mm-Front
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
