Gray PA12
Kyosho RB6 RB7 SC6 3 Gear Trans Wheelie Bar Mount
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.35
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Due to recent pricing changes making Shapeways Strong and Flexible plastics in any color but white too expensive, this part will only be available in the now affordable and stronger HP Multi Jet Fusion PA12 material going forward.
This mount will let you run a traxxas style wheelie bar on your Kyosho RB6 / Rb7 / SC6 mid motor 3 gear setup.
This includes the lay down and stand up options.
You will need 2 M3x18mm and 2 M3x15mm screws in order to mount it to your truck.
The longer screws go into the top holes. The shorter screws go in the middle holes. Use the stock screws for the lower holes.
I recommend using 4 M3x20mm Screws and nuts to hold on the wheelie bar
A good wheelie bar is the strc version. Part Number - ST3678W
or check out rcracinginnovations.com for sweet carbon fiber bars
This mount will let you run a traxxas style wheelie bar on your Kyosho RB6 / Rb7 / SC6 mid motor 3 gear setup.
This includes the lay down and stand up options.
You will need 2 M3x18mm and 2 M3x15mm screws in order to mount it to your truck.
The longer screws go into the top holes. The shorter screws go in the middle holes. Use the stock screws for the lower holes.
I recommend using 4 M3x20mm Screws and nuts to hold on the wheelie bar
A good wheelie bar is the strc version. Part Number - ST3678W
or check out rcracinginnovations.com for sweet carbon fiber bars
Details
What's in the box:
rb7
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
