You must be logged in and verified to contact the designer.
Product Description
The white nylon textured surface can be dyed a color.
IMPORTANT! Your mast must have a Track depth of 22mm and a feed slot of 6" x 1/2"
Durable white nylon has a textured surface that can be dyed a color. Select ORANGE for best viewing or BLACK for best UV protection.
Review at StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
The attached youtube video link is of an earlier version insert.
DRILLING INSTALLATION: The insert sleeve is symmetrical, with two protruding nipple pins. Insert a #55 drill bit into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs. Nipple pins will key into the holes to prevent unintentional sliding of the insert. Removing Insert: I find that a large tweezer is handy for removing the gate by squeezing the side slots at one end together, lift & pull out.
For free warranty and support, Please register your purchase: Name, email, the part number ordered, sailboat's year, make & model at info@MastGates.com I will provide you with a reference number to track your purchase and emails.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: