Alternative Gearbox casing Standoffs for the RC10 Worlds ReRe edition.
Note: Instead of these, you can alternatively use the original Team Associated Stealth standoffs as they are compatible with this casing design.
This item include all 3 standoffs required.
This should be purchased in conjunction with these other parts:
- RC10 Worlds Stealth Gearbox Casing - Left x1
- RC10 Worlds Stealth Gearbox Casing - Right x1
- RC10 Worlds Stealth Gearbox Casing - Diff Output Ring x2
This casing was developed for my replica of the Masami 1989 Worlds winning Stealth RC10GX, but adapted for the Worlds ReRe with two small differences;
- Idler gear shaft inserts directly into the casing as the ReRe idler houses the bearings (whereas the OG design accepted the bearing directly into the casing with a solid idler gear with shaft)
- The two holes for the top plate are slightly further back to accept the Worlds ReRe carbon gearbox top plate
This casing only uses 3 of the long bolts to mount into the motor plate. The fourth front/mid hole accepts a short 4-40 x 1/2" bolt to secure the casing halves together. Refer photo.
The top layshaft will have some side play intentionally so as to allow shimming to the right to increase clearance from the motor plate and bolt tips that was extremely close tollerance on te ReRe.
I recommend: 3x 3/16" x 0.010 shims thickness which measures approx 0.8mm
The separate diff output rings clip into the casing, however it is recommended to also add a couple of drops of super glue to secure them in place to avoid them popping off.