White Natural Versatile Plastic
Proboat Sprintjet Improved Stator Housing
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$15.47
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
The Sundogz stator housing for the Sprintjet has a 3.5mm nipple at the 10:00 location to make it easy to water cool your motor and/or speed control. It works with any 3mm I.D. flexible tubing and available in 9 colors.
Just remove the stock housing and push the stator (fins/bushing) out the back. Install the stator into the new housing making sure to line it up with the internal grooves, then lay it flat on a table and press firmly to make it flush with the stator base (don't try to push it in completely). See pics. Reinstall, making sure the impeller shaft is in the bushing. For more info see post 165 of the following link:
https://www.rcgroups.com/forums/showthread.php?3362499-9-Proboat-JetSprint/page11
Just remove the stock housing and push the stator (fins/bushing) out the back. Install the stator into the new housing making sure to line it up with the internal grooves, then lay it flat on a table and press firmly to make it flush with the stator base (don't try to push it in completely). See pics. Reinstall, making sure the impeller shaft is in the bushing. For more info see post 165 of the following link:
https://www.rcgroups.com/forums/showthread.php?3362499-9-Proboat-JetSprint/page11
Details
What's in the box:
pbsj stator improved
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
