Duke Chassis Part 2

Print With Shapeways

Choose Your Material

$31.40

Versatile Plastic
Starting at $ 26.21

Multi Jet Fusion Plastic
Starting at $ 31.40

Choose your color and finish

You must be logged in and verified to contact the designer.

Chassis Part 2
for "89sabers Duke V2" saber (2020)

Part 2 of the main chassis assembly.

Features:

requires a few custom modifications of the hilt parts (drilling and cutting, see the picture)
for Pixelblade setup with a SCW NPXL™ V3 connector pcb
full size removable 18650 Protected Li-Ion battery
USB-C port support (for SD card Data access, firmware uploads and battery charging)
TC4056 Li-Ion battery charging module support
high power Kill Switch support
BT909 bluetooth module support (we suggest to cut the metal area on top of the bluetooth module location and cover that area with plastic)
Proffieboard, CFX, Verso, GHv3 sound boards support (each board, except CFX, requires it's special holder)
OLED display support
full chassis reveal
working gold button on the emitter
2 working buttons in the rear section
28mm bass speaker

For this chassis assembly you also need:

x1 NPXL V3 pogo pin connector from ShtokCustomWorx (with LONG pins) for Pixelblade/Neopixel setup: NPXL Connector (USA) / NPXL Connector (UK)
x1 plastic transparent lid (lens) for NPXL V3 connector Hilt side pcb: Transparent lid for NPXL V3 connector (USA) / Transparent lid for NPXL V3 connector (UK)
x1 10-Pole (-con) Chassis Connector set: 10-Pole Chassis Connector (USA) / 10-Pole Chassis Connector (UK)
x8 M1.6*5mm self-tapping screws: M1.6 self-tapping Torx head screws
x1 SPKR Connector Type 2 set: SPKR Type 2 Connector (USA) / SPKR Type 2 Connector (UK)
x1 Positive and x1 Negative Battery contact terminals
x1 Kill Switch: High Power Kill Switch (USA) / High Power Kill Switch (UK)
x2 4mm OD 70mm long brass or aluminum or copper tubes
aluminum heat sink for the TC4056 charging module, email me to purchase ($5 USD + shipping): shtokcustomworx@gmail.com
sound board, 28mm bass speaker (regular or TCS), BT909 bluetooth module, USB-C port, TC4056 Li-Ion battery charging module, 18650 high drain 10A or 15A Protected battery
some 30-32AWG, 24AWG and 22AWG wires