White Natural Versatile Plastic
89Sabers Dooku V2 Proffie Chassis
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$49.32
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Chassis for the 89 Sabers Dooku V2 style hilts.
This is a permanent wired in battery design, not removable.
All printed parts that are required for this install are included in this single print purchase. Please carefully remove the stems connecting all the parts together.
This chassis is designed for use with:
-Proffie Board
-KR Sabers 24/22mm Bass speaker
-18650 Lithium Ion Battery
-High Amp (6A) 1.3mm recharge port
-High Amp kill switch
-Shtok speaker PCB set
-Shtok neopixel PCB set (most likely requires sanding down on the outside diameters)
-Two 6 x 6 x 4.3mm tactile switches
This design allows for the board to slide into place once wired up and tested.
The recharge port requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
The Shtok speaker PCB set requires gluing in to place once everything is wired up and tested.
Plan your wiring ahead of time!
Most items that fit in this chassis are meant to be a tight fit.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
This is a permanent wired in battery design, not removable.
All printed parts that are required for this install are included in this single print purchase. Please carefully remove the stems connecting all the parts together.
This chassis is designed for use with:
-Proffie Board
-KR Sabers 24/22mm Bass speaker
-18650 Lithium Ion Battery
-High Amp (6A) 1.3mm recharge port
-High Amp kill switch
-Shtok speaker PCB set
-Shtok neopixel PCB set (most likely requires sanding down on the outside diameters)
-Two 6 x 6 x 4.3mm tactile switches
This design allows for the board to slide into place once wired up and tested.
The recharge port requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
The kill switch requires gluing in to place once everything is wired up and tested. We recommend a dab of hot glue from behind to secure it.
The Shtok speaker PCB set requires gluing in to place once everything is wired up and tested.
Plan your wiring ahead of time!
Most items that fit in this chassis are meant to be a tight fit.
Handle with care.
Any damage occurred during installation is the responsibility of the individual installer.
Details
What's in the box:
Jimmy's Lightsaber Junk 89Sabers Dooku V2 Proffie
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
