Platinum
Windu Elite CrystalHolder - (Part 4/8)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$864.95
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Elite-Chassis for 89sabers Windu
Crystal Chamber for Windu Chassis.
Size for real quartz crystals: max 6mm OD and ~15mm long.
The front crystal holder is to be attached to the batteryholder via neodym magnets (round 4x1mm). There is a flat wire channel for LED and switch-wires. The battery wires go through a dedicated channel at the opposite side.
Tap a m3 thread or similar inch size into the chamber holes. Use 2 setscrews 6mm long and 1 (3-4mm long) to mount it to the chassis. Another 2 setscrews (4mm) to mount the batteryholder.
Tested with polished brass, also available in cheaper gold steel (cheaper but a little less strong material).
Features:
-Plecter Labs Prizm V5.1
-18500 LI-Ion Battery
-2x 3mm accent LED
-crystal chamber
-1x 5mm crystal LED (rgb for violet)
-24mm bass speaker
-28awg wire required (0.09mm² cross section) / 0.25mm² cross section for battery and LED positive
-quick connector RICE port (2.54mm grid)
-2.1mm rechargeport
-snappers for 2W resistors (5mm OD)
Full assembly requires follwing parts to be purchased seperately by yourself:
-4x neodym magnets (round 4x1mm)
-set screws m3 thread or similar inch thread (2x 6mm long, 7x 4mm long, 2x 3mm long for chassis and heatsink retention)
-2.54mm grid connector (3 pins) for RICE
Crystal Chamber for Windu Chassis.
Size for real quartz crystals: max 6mm OD and ~15mm long.
The front crystal holder is to be attached to the batteryholder via neodym magnets (round 4x1mm). There is a flat wire channel for LED and switch-wires. The battery wires go through a dedicated channel at the opposite side.
Tap a m3 thread or similar inch size into the chamber holes. Use 2 setscrews 6mm long and 1 (3-4mm long) to mount it to the chassis. Another 2 setscrews (4mm) to mount the batteryholder.
Tested with polished brass, also available in cheaper gold steel (cheaper but a little less strong material).
Features:
-Plecter Labs Prizm V5.1
-18500 LI-Ion Battery
-2x 3mm accent LED
-crystal chamber
-1x 5mm crystal LED (rgb for violet)
-24mm bass speaker
-28awg wire required (0.09mm² cross section) / 0.25mm² cross section for battery and LED positive
-quick connector RICE port (2.54mm grid)
-2.1mm rechargeport
-snappers for 2W resistors (5mm OD)
Full assembly requires follwing parts to be purchased seperately by yourself:
-4x neodym magnets (round 4x1mm)
-set screws m3 thread or similar inch thread (2x 6mm long, 7x 4mm long, 2x 3mm long for chassis and heatsink retention)
-2.54mm grid connector (3 pins) for RICE
Details
What's in the box:
WinduCrystalHolder
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$9.00
$9.00