You must be logged in and verified to contact the designer.
Product Description
The MPP 2 Chassis is built for the MPP 2.0 Hilt kit (V1 have a thinner batteries size)
--------chassis specification:-------- built to hold Nano V4 soundboard.
a built-in Crystal chamber with a place for two 3mm LED's and a special crystal: MPP crystal a built-in place for Li-Ion 26650 3.7V battery (26mm thick and 70mm long). a built-in place for a 28mm bass speaker. a built-in place for Switchcraft 2.1mm Power Jack inner holes for wiring. a cover cap for the soundboard.
to secure the cap and the chassis in place you will need four brass rods (see the size below)
--------Crystal chamber specification:-------- Crystal chamber is made from three parts, one LED holder, Power Jack cover and chamber body
crystal chamber has built-in holes for two 3mm LED to light the crystal.
crystal chamber built for the MPP Crystal in my shop.
two rods are necessary to secure the crystal chamber together and two more to secure the chamber and the top cap to the chassis:
Two 2.8mm (0.114") solid brass rods for the crystal chamber, length of rod one: 1.851" Rod two: 1.322"
Two 2.8mm (0.114") solid brass rods for the chassis, length of rod one: 4.701" Rod two: 4.151"
* printing in metal can have ± 0.125mm change in size ** Chassis have a small place for resistors, a professional installer is recommended *** some minor modification may be needed (printing can shrink the rods holes by 0.1mm or less)
**** Still not tested****
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: