You must be logged in and verified to contact the designer.
Product Description
This is upgrade parts set for the MP40 made by AGM.
It contains
1) Upgraded chamber
2)Micro switch trigger
3) Rigidity upgrade parts
4) Selector bolt linkage
1) Upgraded chamber
Parts to allow the AGM MP40 to use common electric gun barrels and hop gaskets.
You will need to use the 3 screws, hop lever, hop arm, and hop rubber that were originally included.
Also, you will need to prepare the chamber seal ring separately.
2)Micro switch trigger
Allows you to install a microswitch in the trigger area.
This will allow for a clickable trigger feeling.
However, since the cutoff lever cannot be used, it will be limited to full-auto use.
Please prepare the microswitch, M3x20mm bolt and nut separately.
3) Rigidity upgrade parts
Eliminate the rattling of the upper and lower assemblies.
Please prepare M4×30mm immersion screws and M3×20 screws separately.
4) Selector bolt linkage
This is the part that links the charging handle to the selector.
This allows you to switch between semi-auto and full-auto without the need for a selector.
I've posted instructions on how to install it on my blog, in Japanese only.
Please refer to this page using a translation site.
https://jshardware.militaryblog.jp/e1057291.html
Caution
Output with PA12 is recommended. If you output with other settings, you may need to make adjustments.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: