Tan Fine Detail Plastic
1/50th Fifth Wheel Tow Bar Wrecker unit
Made by
Digital 3D File 
$19.99
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$55.50
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This towing unit is the type that fits onto the fifth wheel via a king pin and front part on top of the frame. I have designed it so the boom will drop and raise, with small bumps that fit into holes at the rear of the frame. You may have to sand these down very carefully so it slips into place, but also stays in place. If you so choose, I've put holes in the side frames that you can slip a pin into, which is not included in this print as it should be metal, like a small piece of wire for strength. Another suggestion is the bar at the end of the boom connects on the top to the boom with three wraps of chain or cable. One should add that in my opinion.
Should there be any problems or questions, contact me via the designer link or directly to modelemechanic@gmail.com
Should there be any problems or questions, contact me via the designer link or directly to modelemechanic@gmail.com
Details
What's in the box:
protote50
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
