RTF203-02 TF2 Mojave Front Body Mount, Pins

***IT HAS COME TO OUR ATTENTION THAT ONLY A SHORT SERVO WILL WORK WITH THIS MOD. A STANDARD DEEP SERVO IS TOO LONG AND WILL PREVENT THE OUTER MOUNT FROM FITTING***

To those of you with a RC4WD Trail Finder 2, I think it is very clear that it is a masterpiece of design. There is, however, one small problem; the body installation and removal process is a little in-depth to say the least. Ampro Engineering is very proud to announce a new body mounting system for the RC4WD Trail Finder 2 Mojave. This set will let you install and remove the body with no tools and only the removal of a couple of body pins. The shell is rigidly mounted and cannot accidentally pop loose. All printed parts are in one order. 

The body-mounted part will work on the RC4WD Mojave, HG P407, Tamiya Bruiser, and Hilux High -lift. 

The "Pin" Version with a cab floor detail is for cars with an auxiliary front bumper. It will need body pins front and rear to hold the shell on. It is a vertical installation. You will need 25-30mm M3 machine screws to install this along with a couple smaller (8mm) for the bodyside mount. Please see the video below for a full installation.