Matte Black Steel
Penn Engine Coupler Head
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$271.92
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This coupler is loosely based on the Penn pivoted pilot coupler illustrated in the 1912 Locomotive Dictionary/cyclopedia. The shank is configured to mate with a short pocket on the pilot beam of a locomotive. The locking pin is not included because it is too thin for printing in steel. Contact me for a drawing of the locking pin.
The knuckle pin hole is cast undersize to allow easier printing of this model. The prototype pin was 1.375" diameter. Drill the hole to this size in your scale and machine a simple pin to mount the knuckle. The split extended boss at the bottom is for a cotter to hold the pin down.
The knuckle pin hole is cast undersize to allow easier printing of this model. The prototype pin was 1.375" diameter. Drill the hole to this size in your scale and machine a simple pin to mount the knuckle. The split extended boss at the bottom is for a cotter to hold the pin down.
Details
What's in the box:
Penn Engine Coupler Head 1 1-2
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
