Basic Nylon Plastic
rim040-01 FMS Blazer Wagon Wheel
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$4.09
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
These wheels are for the FMS K5 Blazer. They allow you to use the factory bead lock system, tires, and screws. These have only been used on a SLS printer. They decrease the wheel offset as much as possible without hitting the portals or the tires hitting the body. Do not cure these for more than 1.5min as the screw bosses can crack when installing the screw. Slowly install and back out the screws little by little so that the screws will slowly cut the threads. Minor cracking to the screw bosses will not affect the tire mounting integrity. Ensure the screw bosses are clean. Wall thickness of the screw boss can be affected by the Natural plastic and PA12.
White Natural Versatile Plastic will decrease the detail but are durable and inexpensive.
PA12 has better detail than the above material and is stronger but costs more.
Ultra detail is what you see in the image for this product but are weaker and cost more.
You will need to order 4 for a full set.
White Natural Versatile Plastic will decrease the detail but are durable and inexpensive.
PA12 has better detail than the above material and is stronger but costs more.
Ultra detail is what you see in the image for this product but are weaker and cost more.
You will need to order 4 for a full set.
Details
What's in the box:
rim040-01_0-1_wagon_wheel
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
