Fujifilm X-T4 Compact Arca Tripod Plate

If you have your own printer or want to modify this more, you can download files here: https://www.thingiverse.com/thing:4922528

This is a very compact arca-type tripod plate designed to fit the Fujifilm X-T4.

It's designed to match the shape of the camera body and brace against it to stay secure, while leaving plenty of room to get the battery out without removing the plate.

The plate includes a strap connection point so you can get your wrist or neck strap connectors out of the way of your hands by putting them under the body*.

It's also much smaller than dedicated X-T4 tripod plates I was able to find for sale online, increasing the height of the body by just about 6.3mm.

I've tested it with both of these screws:
https://www.mcmaster.com/90276A534/
https://www.mcmaster.com/92220A181/
Just get a 1/4 20 screw that is about 1/4" long, with a head no taller than 0.175".

⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is your up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.

I have not tested this design with lenses heavier than the XF 16-80 f/4 - though with very heavy lenses you should probably not carry it by the body anyway.

*This is designed to fit two of the big Op/Tech Uni Loop buckle connectors side by side (one for a wrist strap, one for a neck/sling strap) - but many other types of strap connector should fit.