You must be logged in and verified to contact the designer.
Product Description
UPDATE to model 3/23/23
Snap-in insert with Track Depth of 20mm.
Made for feed slot 150mm x 19mm
First, drill two holes into the feed slot for the two bottom nipples of the MastGate.
You will need to route grooves into the side walls of the feed slot.
Video instructions on Youtube. https://youtu.be/VvgMuhgE8TI
WHITE textured nylon surface can be dyed a color. BLACK is best for UV protection.
DRILLING INSTALLATION for Nipple pin : The MastGate sleeve is symmetrical, with two bottom protruding nipple pins. Insert a #55 drill bit into each nipple pin's drill guide hole before centering the insert into the feed slot. Lightly hammer the drill bit to make a mark into the aluminum channel. Remove the insert to center punch marks and complete the drilling. Use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs. Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding in the channel.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: