Black Natural Versatile Plastic
FZX standalone headlight bracket
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$53.16
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
FZX headlight bracket for Yamaha FZX and Radian - 3D model after the Yamaha part number 1UF-84319-00 pattern.
I tired my best to recreate the shape of the original part with regards and some modifications to the 3D printing process.
Attention:
This is the standalone bracketpart - it is not compatible with the original Yamaha part.
This part, assembled with my standalone headlight housing is then fully compatible with the original yamaha headlight assembly with the exeption of the front cover. The original front cover will have to be modified slightly (make room for the standalone bracket on the left side) or you can use my front cover V2.
If you need a replacement housing, but have all the other parts for the assembly (rubber buffers, screws, special washers, headlight bracket, ... ) get my "Original" - Version of the housing!
To assemble this with the housing and the bike, you will need:
Screws (all cylindrical screws with hex head!):
1x M8x15 for the connection "bracket --> housing"
1x M6x15 for the connection "bracket --> housing (adjuster screw)"
1x M6x25 for the connection "housing --> bike"
1x M8x60 for the connection "bracket --> bike"
Nuts:
2xM8 self locking nut for the connection "bracket --> housing" and "bracket --> bike"
1x M6 nut for the connection "bracket --> housing (adjuster screw)"
Washers:
2 large M6 washers - 1 for each side of the connection "housing --> bike"
Disclaimer: This is not an original Yamaha part - it is an aftermarket part. And obviously it is not tested or certified in any way for road legality (where aplicable), so use at your own risk!
I tired my best to recreate the shape of the original part with regards and some modifications to the 3D printing process.
Attention:
This is the standalone bracketpart - it is not compatible with the original Yamaha part.
This part, assembled with my standalone headlight housing is then fully compatible with the original yamaha headlight assembly with the exeption of the front cover. The original front cover will have to be modified slightly (make room for the standalone bracket on the left side) or you can use my front cover V2.
If you need a replacement housing, but have all the other parts for the assembly (rubber buffers, screws, special washers, headlight bracket, ... ) get my "Original" - Version of the housing!
To assemble this with the housing and the bike, you will need:
Screws (all cylindrical screws with hex head!):
1x M8x15 for the connection "bracket --> housing"
1x M6x15 for the connection "bracket --> housing (adjuster screw)"
1x M6x25 for the connection "housing --> bike"
1x M8x60 for the connection "bracket --> bike"
Nuts:
2xM8 self locking nut for the connection "bracket --> housing" and "bracket --> bike"
1x M6 nut for the connection "bracket --> housing (adjuster screw)"
Washers:
2 large M6 washers - 1 for each side of the connection "housing --> bike"
Disclaimer: This is not an original Yamaha part - it is an aftermarket part. And obviously it is not tested or certified in any way for road legality (where aplicable), so use at your own risk!
Details
What's in the box:
fzx_headlight_bracket
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$28.33
$22.04
