Tamiya buggy rear mono shock rocker set

Rocker set for vintage tamiya SRB buggies.  Requires the use of aftermarket cage.  4 flanged spacers are required for the pushrod to pivot on.  Hardware holes will self thread, can easily be tapped, or can easily be enlarged depending on what hardware you use.  The rocker hole can easily be enlarged if you wish to use a bushing.  These will require some tinkering to get functioning smoothly.
These come attached via part tree (to reduce per-part cost) and will need to be carefully trimmed apart with a sharp hobby blade.  They can be dyed any color.  If ordering the black version, you will need to touch up the black at trim points with a sharpie or something similar.
****As with any printed part, ensure holes are clear of any remaining plastic material from production before attempting to run a screw into them!****