Click and drag to rotate
Heat Sink Fins for Rudy's Crystal Chamber (Full Le 3d printed

DIGITAL PREVIEW
Not a Photo

Polished Bronzed-Silver Steel
Heat Sink Fins for Rudy's Crystal Chamber (Full Le 3d printed
Heat Sink Fins for Rudy's Crystal Chamber (Full Le 3d printed

DIGITAL PREVIEW
Not a Photo

Heat Sink Fins for Rudy's Crystal Chamber (Full Le

Made by
Print With Shapeways
Choose Your Material
$46.09
Choose your color and finish
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
These fins are designed as an easy upgrade for Rudy Pando's (Spirit of ob1 on the RPF) crystal chamber for the Roman Props MK1 Obi Wan lightsaber.

The fins should just clip straight onto the existing brass wire run rods on the back with no further modification.

My test piece was printed in Raw Bronze and this is what I recommend. Shapeways Raw Bronze is 90% copper and 10% tin, in my test part printed in this I submerged it in drain cleaner which removed most of the surface tin leaving me with a much more coppery appearance.

[PLEASE NOTE: Shapeways Steel, in my experience, is not as dimensionally accurate as the other materials and I suggest if you are planning to choose this material be prepared that it may not clip in place properly and may need to be either glued or have material filed away to fit]

The swap in chamber upgrades from ShtokCustomWorx work great with these fins: Part 1 Part 2
Details
What's in the box:
rudy mk1 fins full
Dimensions:
0.94 x 2.53 x 4.03 cm
Switch to inches
0.37 x 1 x 1.59 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.