1/144 Scale Modern Italian C1 Ariete Main Battle Tank.
Highly detailed Tank with accurate Track detail and moveable Turret
Contains:
- 1x Italian C1 Ariete Main Battle Tank
Italian C1 Ariete Main Battle Tank
The
C1 Ariete is the
main battle tank of the
Italian Army, developed by a consortium formed by
Iveco-
Fiat and
Oto Melara (CIO, Consorzio Iveco Oto Melara). The chassis and engine were produced by Iveco, while the turret and
fire-control system were supplied by Oto Melara. The vehicle carries the latest optical and digital-imaging and fire-control systems, enabling it to fight day and night and to fire on the move. Six prototypes were developed by 1988, which were subject to intensive testing the following year during which the vehicles travelled a combined 16,000 km. Deliveries were first planned for 1993, but in fact took place in 1995 due to delays. Final delivery occurred 8 years later in August 2002.The Ariete's main armament is a local version of the smoothbore Rheinmetall 120 mm gun, produced by
Oto Melara,
autofrettaged and stress-hardened to increase durability over extended periods of firing, allowing the use of
APFSDS-T and
HEAT ammunition. The gun is also adapted to fire most NATO-standard rounds of the same calibre. It carries 42 rounds, 27 of which are stored in a special magazine inside the hull, to the left of the driver's station. The remaining ammunition is stored in the rear turret bustle, separated from the crew compartment with an armoured door. The gun barrel has a thermal insulating sleeve and a fume extractor; it is fully stabilized in both azimuth and elevation by an electro-hydraulic drive system.
Secondary armament consists of a
7.62 mm MG 42/59 coaxial machine gun operated by the tank gunner or commander and an additional 7.62 mm MG 42/59 configured as an
anti-aircraft weapon operated by the main-gun loader from his hatch.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.