You must be logged in and verified to contact the designer.
Product Description
For Project M owners. Sold as single units (if you want two, you must order two).
NOTE: this just an unfinished part which will require some DIY work. Use this to plug the Project M pommels when using in two-separate-hilts mode. This piece is based on the split-away SFX prop hilt, and therefore reflects what the saber looked like when it was actually split in half on screen. Paint with a light coat of aluminum spraypaint (we recommend Krylon Fusion 2766 Metallic Aluminum), and top off with a light coat of satin clearcoat (we recommend Rustoleum 285092 Satin Clear Enamel). Then fill the three countersunk holes with M3 countersunk screws, and install just as you would install the coupler, using the Red and Silver thumbscrews. The fit can be very tight once painted, so make sure you give the paint ample time to try, and consider using a lubricant to ensure easy removal, (we recommend either WD-40 or Parktool Polylube 1000 PPL-1).
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: