You must be logged in and verified to contact the designer.
This is the 20 FT section Swinging box lead in 1:50 scale , lenght is 120 mm.
It is intended to use in combination with the 1-50 Dieselhammer D62 + guids for Swinging lead.
To make a complete lead you need at least :
1 - 10 FT Top Swinging box lead.
2 - 10 FT Stab Swinging box lead.
3 - And 1 or more 10 or 20 FT section Swinging box lead.
Available in 1 material , 1 color , black
In the example I used a ; 1 x 10 feet section and 2 x 20 feet section and a stab and top section.
What gives a total length of 430 mm , of course other lenghts or also possible.
this is also the minium length if you want to use 1 50 Square Pole 8MM X 240MM.
For the result as seen on the pictures the model need to be spray painted.
Start with a thick layer of primer and let the material soak up the primer.
When dry start sanding with waterproof sandpaper 500.
Then another layer of primer and sanding again.
Now the third layer of primer and some minor sanding.
And finally the layer of paint.