Click and drag to rotate
Dual Wahoo Adapter 3d printed

Not a Photo

Black PA12
Dual Wahoo Adapter 3d printed
Dual Wahoo Adapter 3d printed

Not a Photo

Dual Wahoo Adapter

3D printed in nylon 12 material with a matte finish and slightly grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This adapter takes a Wahoo Mount and turns it into a dual mount that will allow two BOLT or ELEMNT devices to mount side by side. The BOLT design requires that each be installed separately while the ELEMNT must be mounted simultaneously. This adapter raises the devices approximately 7 mm. The two Wahoo mounts are 72 mm center-to-center. No additional hardware is required.

Versatile vs. Multi Jet Fusion PA12. Why two blacks? 
All 3D prints are made from the same raw white Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, is cleaned and then placed in a black dye bath. Black Natural Versatile Plastic is not polished or surface finished in any other manner. The result is a grainy/fuzzy surface texture. All other Versatile Plastic parts are polished before dyeing and have a satin sheen as a result of the polishing process. MJF PA12 starts with similar raw material and a liquid binder (gray) resulting in more even and saturated color when dyed. MJF PA12 has a matte finish and slight grainy feel. The technology used in MJF PA12 produces a stronger print.
What's in the box:
Dual Wahoo Adapter
10.2 x 6.81 x 0.91 cm
Switch to inches
4.02 x 2.68 x 0.36 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.