U3000 scale frame 1:13,5 with front spring holder for springs with 12.5mm inner diameter and central gear box monting points.

unimog front cross beam smal for 55mm wide frame width scale 1:13,5. This cross beam is necessary to complete the Unimog frame.

Unimog rear cross beam for 55mm wide frame scale 1:13,5, You need this cross beam to complete the Unimog frame.

Unimog cross beam with rear spring and shock holder scale 1:13,5 for Unimog frame.

This is the portal case for the U5000 1:13.5 portal axle. This will fit to all standard 1.9" rims. For one front axle you would need 2 times this c...

This steering arm is necessary to istall the portal case to the C-Hub

This portal case is necessary to complete the portal axle. To this portals will fit all standard 1.9" rims. You need two of this to complete the po...

This portal cover is necessary to complete the portal axle. This portal cover is designed to be weight up with plumb. To this portals will fit all ...

C-Hub for U5000 portals and scale front axles.

beadlock wheels for RC trucks and cars with 10 lugs M1.6, D=52 / B=24 / Offset=+4 should fit to all 1.9" tires and to 3 Racing portals for AX10 / SCX

This linkage and shock holder is designed to fit to the Tamyia XC-01 / CC-01 rear axle. Only smal modification at the axle are necessary. The hold...

This linkage and shock holder is designed to fit to the Tamyia XC-01 / CC-01 rear axle. Only smal modification at the axle are necessary. The hold...

This Link and damper / shock holder is designed to fit unter the RC4WD Beowuld axle. The hole for the linkage is 2.5mm, and the hole for the damper...

This Y-Linkholder with 45 degree, is designed to fit on a 6mm ball and M3 thread rod.

This Y-Linkholder is designed to fit on 4.7mm balls (Tamiya define the balls as 5mm) and M3 thread rod.

This is a adapter to install a 540 brushless sensored motor to several screwdriver 1-speed or 2-speed gear boxes. If you have any questions or need...

This is a adapter to install a 540 brushless sensored motor to several screwdriver 1-speed or 2-speed gear boxes. If you have any questions or need...

This is a transfer gear box for RC trucks and cars. This transfercase fits to several 1-speed and 2-speed screw driver gear boxes. For more details...

This portal axle was designed to fit under a 1:12 - 1:13,5 scale Unimog. BamaTech Diff is required with extra long pinion gear. All standard 1.9" r...

This portal axle was designed to use the BamaTech Diff and min. standard 1.9" rims. The width over all is 170mm. With 5mm Hex and 0 Offset rims, a ...

This is a transfer gear box cover for the transfer gear box. This can be used for RC trucks and cars. This transfercase cover is designed to attach...

This is the axle tube for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. Will come soon.

This is the diff housing for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. Will come ...

This is the push tube (Schubrohr) for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. W...