mctrivia is selling 352 products in Sides%5B015%5D section
by
mctrivia
This die has been tested and has been found unfair.Photo provided courtesy of dicecollector.com
by
mctrivia
suspended in the center of a cube made up of 12 springs is a ball supported by 8 more springs. Waited fairly and if made of a flexible material sh...
by
mctrivia
6 crosses made to standard dimensions, oriented and weighted to roll fair.This die has been tested and found fair.
by
mctrivia
6 crosses made to standard dimensions, oriented and weighted to roll fair.this die has been tested and found fair.
by
mctrivia
Want to make your own die. Now you can. Get each side dyed different colours, configure the dye to prefer one side over another or get the shell ...
by
mctrivia
were this printed on a 4d printer it would be 8 cubes of equal size connected together so that each face of a cube is connected to another cube.
by
mctrivia
An interesting die design. carefully crafted to have a center of gravity exactly in the center of the die it will fall fairly. But the dots do no...
by
mctrivia
It has come to my attention that though both sides of each face can be landed on they are still the same face when looking at in the 4th dimension....
by
mctrivia
This is a shadow of a 4 dimensional D24 Die. The shape is called a hyper cube. It is made up of 8 equally sized cubes with each face of each cube...
by
mctrivia
A simple 3/4" die with no center. Die is fairly weightedThis die has been tested and found fair
by
mctrivia
What is it? Well it is a die without the die. I took a standard die removed everything but the pips then placed supports in the corners...
by
mctrivia
A light D6 with sides floating on the corners. Care has bean taken to weight so the die will be fair.This die has been tested and found fair.
by
mctrivia
A light D6 with sides floating on the corners. In each of the 8 corners a small spike has been included to make sure it can only land on 1 of the ...
by
mctrivia
A light D6 with sides floating on the corners. The sides have been clawed giving a pretty cool look. Care has bean taken to weight so the die wil...
by
mctrivia
A die in the shape of the symbol PI. To make it even better this die is perfectly weighted and all sides are roughly the same landing area. If ro...
by
mctrivia
Designed to look like a traditional die but instead of the sides being numbered 123456 they are numbered 314159 after the first 6 digits of pi.
Yo...
by
mctrivia
Designed to look like a traditional die but instead of the sides being numbered 123456 they are numbered 314159 after the first 6 digits of pi.You ...
by
mctrivia
Know someone that loves dice? Here is the perfect thing for them. A personalized die. The corner supports can be made up of any 2 letters. Die ...
by
mctrivia
Can you figure out what side is what? It can be done but can be difficult. Hint 1,2,3 are always counter clockwise. This was my hardest die yet ...
by
mctrivia
Same as Binary D6 but with the most significant digit marked to make easy to read.Photo provided courtesy of dicecollector.com
by
mctrivia
Like my Hex Die but has but sides have been cut out to show the hollow core.
by
mctrivia
A D16 with each side labeled in binary. Thickness of each side has been carefully selected to properly balance the die so it will roll fair. MSB ...
by
mctrivia
Just the numbers and nothing but. Does not look like a die at first glance but if you roll it on a table and look straight down the value of your r...
by
mctrivia
Just the numbers and nothing but. This die should be close to fair but has not yet been tested and is probably not perfectly fair.
by
mctrivia
a D4,D6,D8, and D10 all made of nothing but the numbers themselves. They are functional and beautiful but may not be entirely fair. They should b...
by
mctrivia
Original designed to be printable on a home made 3D printer this die was originally 90mm tall. It has been scaled down to be a more reasonable siz...
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The numb...
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The nu...
by
mctrivia
Does not look like it from render but this is a D6. You read the numbers on the points of the 8 sided diamond in the center of the cube. The number...
by
mctrivia
Read the number from the point of the center shape.Photo provided courtesy of dicecollector.com
Shop Details
Expertise
- 3D modeler
- Designer
- Product designer
Shop Sections
- All Sections
- Build Type[Frame]
- Build Type[Hollow]
- Build Type[Points]
- Build Type[Solid]
- Build Type[Truncated Sphere]
- Customizable
- Dice Set[Crystal]
- Dice Set[Dual]
- Dice Set[Frameless]
- Dice Set[Grid]
- Dice Set[Points]
- Dice Set[Prime]
- Material[Glass]
- Material[Metal]
- Non Dice
- Sides[002]
- Sides[003]
- Sides[004]
- Sides[005]
- Sides[006]
- Sides[007]
- Sides[008]
- Sides[009]
- Sides[010]
- Sides[011]
- Sides[012]
- Sides[013]
- Sides[015]
- Sides[016]
- Sides[017]
- Sides[018]
- Sides[019]
- Sides[020]
- Sides[022]
- Sides[024]
- Sides[025]
- Sides[028]
- Sides[030]
- Sides[034]
- Sides[036]
- Sides[040]
- Sides[048]
- Sides[060]
- Sides[100]
- Sides[144]
- Sides[256]
- Specialty[4D]
- Specialty[Data]
- Specialty[Loaded]
- Specialty[Lottery]
- Specialty[Math]
- Specialty[Obfuscation]
- Specialty[Shell]
- Specialty[Time]
- Vinshi's Designs
