GWMT

Designs by GWMT

We found 10 products by GWMT

by GWMT
Ontario Northland 4500-4509 HO 10'-10" Bulkhead Pulp Flat R2
 
(0)  
  •  
Not For Sale
 
by GWMT
Two 20' Steel Coil Hoods/Skids combined for HO scale 50' gondolas or flat cars
 
(0)  
  •  
From: $27.78
 
by GWMT
20 Wheel Stops HO scale. Sized to fit Code 83 rail; add shims or glue to fit smaller code rail. Clean all residue from the notch for the rail head with an Xacto #11 blade for best fit. Light sanding to smooth out the curved surfaces required.
 
(0)  
  •  
From: $9.77
 
by GWMT
Canadian Pacific 304000-304300 HO 8'-6" Bulkhead Flat with Stake Pockets only
 
(0)  
  •  
Not For Sale
 
by GWMT
N scale (1:160) Buda 6-bolt wheel stops - 32 per print. Sized for Atlas code 80 rail; use a tiny drop of white glue or ACC to fix them to smaller rail. Each wheel stop measures 5.5mm long, 4.8mm tall and 1.5mm wide. Based on a CN prototype. Price is $0.60 per wheel stop. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749 Cleaning, sprue removal and installation instructions are in the Instructions section of the Shapeways Forum: http://www.shapeways.com/forum/index.php?t=msg&th=12233&start=0&
 
(0)  
  •  
From: $19.20
 
by GWMT
N scale 20' coil hoods designed to be carried in 50' and 52'-6" gondolas. Based on a DT&I prototype used from the late 1950's to the mid 1980's. Print contains four coil hoods - enough for two gondolas. Immerse the print for ten minutes in acetone (cheap nail polish remover) or Bestine to remove the wax support material before painting. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749
 
(0)  
  •  
From: $33.95
 
by GWMT
HO scale (1:87) Buda 6-bolt wheel stops - 10 per print. Sized for Atlas code 83 rail; use a tiny drop of white glue or ACC to fix them to smaller rail. Each wheel stop measures 10.15mm long, 9.08mm tall, 3.66mm wide. Based on a CN prototype. Price is $1.60 per wheel stop. Immerse the print for ten minutes in acetone (cheap nail polish remover) or Bestine to remove the wax support material before painting. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749
 
(0)  
  •  
From: $16.00
 
by GWMT
20 Buda 6-bolt wheel stops for HO scale. Price is $0.80 per piece. Based on a CN prototype.Sized to fit code 83 rail; add shims or glue to fit smaller code rail. Clean all residue from the notch for the rail head with an Xacto #11 blade for best fit. Light sanding to smooth out the curved surfaces required. Overall dimensions are 10.15mm long, 9.08mm tall, 3.66mm wide. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749
 
(0)  
  •  
From: $16.00
 
by GWMT
HO scale (1:87) Buda 6-bolt wheel stops - 20 per print. Sized for Atlas code 83 rail; use a tiny drop of white glue or ACC to fix them to smaller rail. Each wheel stop measures 10.15mm long, 9.08mm tall, 3.66mm wide. Based on a CN prototype. Price is $1.60 per wheel stop. Immerse the print for ten minutes in acetone (cheap nail polish remover) or Bestine to remove the wax support material before painting. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749
 
(0)  
  •  
From: $32.00
 
by GWMT
40 Buda 6-bolt wheel stops for HO scale. Price is $0.80 per piece. Based on a CN prototype.Sized to fit code 83 rail; add shims or glue to fit smaller code rail. Clean all residue from the notch for the rail head with an Xacto #11 blade for best fit. Light sanding to smooth out the curved surfaces required. Overall dimensions are 10.15mm long, 9.08mm tall, 3.66mm wide. A precision sprue cutter like the Intermountain BB-1015, Micro-Mark #82393 or UMM-USA GMT01 is the best tool to cut the parts from the support framework. http://umm-usa.com/onlinestore/product_info.php?cPath=21_28&products_id=3749
 
(0)  
  •  
From: $32.00
 
Shop Details
Products for model railroads