Helijenks

Designs by Helijenks
Contact Designer

We found 49 products by Helijenks

Per Page: 12 36   View: Grid | List
Seat Frame Deck Fixing Point
by Helijenks
Huey 1:6 Scale Seat Frame Deck Fixing Point - required for all seat legs, these are fitted to the bottom of the legs with an M2 washer and Self Tap...
 
(0)  
  •  
From: $7.99
 
Casing Clip Assembly
by Helijenks
Helicopter Casing Clip (Working) with Lock pin - suitable for all scale Models, this item is currently 1:6 scale
 
(0)  
  •  
From: $5.99
 
1:6 Scale Cyclic Stick - Dissembled (V2)
by Helijenks
1:6 Scale Huey Cyclic Stick - Can be made operational, comes with a base shroud capture plate for the cyclic "Boot" cover. Can be available in any ...
 
(0)  
  •  
From: $16.00
 
Foot Pedal Assembly
by Helijenks
Revised (20/05/13) - Helicopter Yaw Control Pedals (Bell) 1:6 Scale The Foot Pedals can be made to work (All parts movable) but you will require M1...
 
(0)  
  •  
From: $18.44
 
Collective Stick Assembly - Dissembled
by Helijenks
1:6 Scale Collective Stick for the Huey (Bell) - engraved lettering, requires assembly. There is access to fit a 2.5 mm LED at the Engine Idle posi...
 
(0)  
  •  
From: $21.51
 
Nav Light - Lens
by Helijenks
1:6 Scale NAV Light Lens (Clear Material) - This needs to be ordered in conjunction with the NAV Light and ..... to the same scale that you have or...
 
(0)  
  •  
From: $5.79
 
Nav Light 1
by Helijenks
1:6 scale Nav Light - The base has a slight camber on it to allow mounting onto a curved section of the fuselage, if not required - this can be san...
 
(0)  
  •  
From: $6.99
 
Skid Pad Eye - Logitudenal
by Helijenks
4mm Wide Pad Eye with 16mm Dia curve base that gives a fixing parallel to the skid.
 
(0)  
  •  
From: $4.27
 
Skid Padeye - Lateral 3mm Hole
by Helijenks
4mm Dia Pad Eye that fits to skids with lateral hole to the skid.
 
(0)  
  •  
From: $4.25
 
Huey - Single Rear Cabin Seat (Rev 1)
by Helijenks
1:6 Scale Seat Frame for Huey Rear Cabin, requires Seat Deck fixing points if full scale detail is required - to be ordered separately (Minimum 4 R...
 
(0)  
  •  
From: $48.47
 
Dashboard Assembly
by Helijenks
Bell UH-1B Instrument Panel for 1:6 Scale to Len Mount - Huey
 
(0)  
  •  
From: $277.47
 
Huey Starboard Side Weapons System
by Helijenks
1:6 Scale HUEY (Iroquois - UH-1 Series) Weapons System for the STARBOARD side, Including the fully detailed Weapons Support System, Rocket Launche...
 
(0)  
  •  
Not For Sale
 
Huey Port Side Weapons System
by Helijenks
1:6 Scale HUEY (Iroquois - UH-1 Series) Weapons System for the PORT side, Including the fully detailed Weapons Support System, Rocket Launcher, Ga...
 
(0)  
  •  
Not For Sale
 
Skid Protector Assembly
by Helijenks
16mm Radius x 260mm Skid Protector for Bell Helicopters, I can supply in different Radius and length, 4 off are required for the LM Huey, they but...
 
(0)  
  •  
From: $20.11
 
3mm Jaw Bracket & Fixing Point
by Helijenks
3mm wide (internally) Mounting Bracket and fixing point for use with Cable Cutters or other items to be fixed to fuselages.
 
(0)  
  •  
From: $4.80
 
Pilot Step - Skid Tip - 15mm
by Helijenks
 
(0)  
  •  
From: $10.47
 
Pilot Seat Frame Assembly
by Helijenks
Helicopter Pilot Seat 1:6 Scale - This model is adjustable for the seat angle, height and position. A superb addition to most helicopter cockpit's ...
 
(0)  
  •  
From: $215.60
 
Huey UH-1B Rear Seat Assembly
by Helijenks
Huey 1:6 Scale Rear Cabin Seat Frame Assembly to suit LM Huey, can be scaled down to fit other models - Contact Helijenks@gmail.com. All parts ar...
 
(0)  
  •  
From: $133.99
 
M213 MG Assembly
by Helijenks
 
(0)  
  •  
From: $35.06
 
Front Hatch Assembly
by Helijenks
Bell Forward Hatch Electronics Layout 1:6 Scale
 
(0)  
  •  
From: $162.68
 
32 Mm Arc - Cantilever Arm Clevis Type Assembly Fo
by Helijenks
32 mm Arc Cantilever Hinge with Clevis type fixing, to suit 2mm Nut & Bolt
 
(0)  
  •  
From: $6.90
 
Teardrop Light Lens
by Helijenks
Apache Teardrop Side Nav Light
 
(0)  
  •  
From: $6.86
 
"Tail End" Skid Cap 16mm Skid Tube
by Helijenks
"Tail End" Skid Cap to finish of the Scale detail - available in different diameters. Contact helijenks@gmail.com for special orders
 
(0)  
  •  
From: $10.54
 
16mm X 320 Skid Protector
by Helijenks
16mm Dia Skid Protectors 320mm Long each (2 off required per side)
 
(0)  
  •  
From: $24.40
 
1:6 Scale Pilot Map Box
by Helijenks
The box has an operational hinged Lid, you will need to create the hinge pin with 1.5mm wire - Suits all 1:6 Scale Helicopters. 2 x Thermos Flasks ...
 
(0)  
  •  
From: $46.11
 
Huey Centre Console Assembly Parts
by Helijenks
Various parts required to complete the build of 1:6 Scale Huey Center Console, include embossed Dials and Barrels showing Frequecies, Ammo Count an...
 
(0)  
  •  
From: $13.74
 
1:4 to 1:6 Scale Wire Cutter Blade Stay Kit
by Helijenks
Wire Cutter Blade(s) - Stay Assembly Kit for 1:4 to 1:6 Scale Kits. If other sizes are required ...contact helijenks@gmail.com
 
(0)  
  •  
From: $6.73
 
HUEY Over Head Cockpit Panel
by Helijenks
Overhead Panel to suit LM Huey 1:6:5 Scale, can be scaled down to suit. It has embossed lettering where shown. For variants in Scale contact helije...
 
(0)  
  •  
From: $55.61
 
HUEY Centre Console Panel 1:6:5 Scale
by Helijenks
HUEY UH- 1B Center Console at 1:6:5 scale to suit LM Huey (and others) Requires the Center Cole Assembly parts to complete (Sold separetly) The mos...
 
(0)  
  •  
From: $198.07
 
Top Cable Cutter Assembly
by Helijenks
1:7 scale Top of Fuselage Cable Cutter with support arms & mounts, can be made in other scales - Contact : helijenks@gmail.com
 
(0)  
  •  
From: $10.49
 
Under Fuselage Cable Cutter
by Helijenks
1:7 Scale Cable Cutters to Suit Bell Helicopter, This set can be used either on the top or bottom of the fuselage, however, they are really for und...
 
(0)  
  •  
From: $9.97
 
Pilot Seat Frame Assembly - Seat & Framework Pilo
by Helijenks
1:6 Scale Helicopter Pilot Seat Frame & seat, requires Base unit to be ordered separately. When assembled, this seat will elevate, slide & Tilt. Th...
 
(0)  
  •  
From: $166.46
 
Huey - Single Rear Cabin Seat 1:6
by Helijenks
Huey - Single Rear Cabin Seat 1:6 scale , (requires assembly) and Deck Fixing Points (4 Off) to be ordered separately. This superb Framework will n...
 
(0)  
  •  
From: $44.94
 
Lens & Dome Assembly No Lens
by Helijenks
EC 145 Tail Fin Nav Light - order Clear Lens separately.
 
(0)  
  •  
From: $5.12
 
Huey Small Parts Fittings Kit For Port & Starboard
by Helijenks
Fitting required for the full assembly of the Port & Starboard Side Huey Weapons Systems - This is one set only and has spares included, 2 sets are...
 
(0)  
  •  
From: $19.71
 
Light Lens
by Helijenks
Clear Lens for EC145 Tail Nav Light
 
(0)  
  •  
From: $5.19
 
Shop Details
3D Model Parts for Helicopters, Trains, Boats & Planes

Expertise

  • 3D modeler
  • Product designer
  • Artist
  • Maker