This Part mates the Jansjö lamp to Steelworks or other material with holes on 1-inch centers, freeing up desk/workbench space that would otherwise be taken by desk lamp(s). Having the lamps anchored solidly also makes repositioning a one-handed affair.
The angle iron on this bench has 0.4" holes for 5/16" bolts. 5/16" was a bit beefy for this little part and I already had a nice-fitting hex-head recess for 1/4" bolts, so I used that. The result is that the bolt fit in the holes is sloppy, but the protrusion in the center of the back of the part engages a 0.4" hole snugly and holds the part in position. The holes are slightly below center to match the alignment of the angle iron and look more aesthetically pleasing. The hole on the end is a somewhat frivolous and not too well thought-out cable grommet so you can feed the Janjsö's power cord through it. Unfortunately there's a switch and a big plug on the cord so to feed it through the hole you need to cut and splice the cable. It's low-voltage so there's not much safety risk, but you do have to get the polarity right since this is after all an LED lamp.
Ikea Jansjö Lamp Mount by JuliaDee is licensed under the Attribution - Share Alike - Creative Commons license.
Ikea Jansjö Lamp Mount (JuliaDee) / CC BY-SA 3.0 201.696.58 20169658
Lost one of the plastic feet from your Ikea Julius barstool?
Replace it with this 3D print. Instructions: Force into metal foot of stool like you would the original.
The profile is not 100% the same, so you might consider printing 4 new feet if you want them to look exactly alike :) Print at 100% solid for a nice solid foot.
*Use at your own risk!
License: Attribution - Share Alike - Creative Commons Created by Jimmern
http://www.thingiverse.com/thing:25140 Ikea Julius Bar Stool Replacement foot (Jimmern) / CC BY-SA 3.0
Ikea Ivar Shelf Cable Clip A clip for the Ivar shelves to hold a cable Ikea Ivar Shelf Cable Clip by Queued is licensed under the Attribution - Creative Commons license.
Ikea Ivar Shelf Cable Clip (Queued) / CC BY 3.0
Made with Tinkercad: https://tinkercad.com/things/br4NG9bJBvW
Not For Sale
In order to reduce waste, our goal is to have as many IKEA replacement parts on Shapeways as possible. Please help us out by uploading IKEA replacement parts in your shop as well.
IKEAshop is NOT connected in any way to Inter IKEA systems B.V..