3d render showing product detail
1/144 German Kanonenjagdpanzer Tank Destroyer
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$35.55
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/144 Scale German Kanonenjagdpanzer Tank Destroyer.
Highly detailed tank with accurate Track detail.
Contains:
Kanonenjagdpanzer Tank Destroyer
The Kanonenjagdpanzer (also known as Jagdpanzer Kanone 90mm, or tank destroyer, gun) was a German Cold War tank destroyer equipped with a 90mm anti-tank gun from obsolete M47 Patton tanks. Its design was very similar to that of the World War II Jagdpanzer IV.The first prototypes of the Kanonenjagdpanzer were built in 1960 by Hanomag and Henschel for West Germany and by MOWAG for Switzerland. Between 1966 and 1967, 770 units were built for the Bundeswehr, 385 by Hanomag and 385 by Henschel. Eighty of them were delivered to Belgium from April 1975 onward.
When the Soviets began deploying their T-64 and T-72 main battle tanks, the 90 mm gun was not capable of engaging them in long-range combat and the Kanonenjagdpanzer became obsolete. Although the producers claimed it could be rearmed with a 105 mm gun, between 1983 and 1985, 163 of these tank destroyers were converted into Raketenjagdpanzer Jaguar 2 anti-tank guided missile carriers by removing the gun, adding a roof-mounted TOW missile launcher and fastening further spaced and perforated armour on the hull. Some others were refitted into artillery observation vehicles by removing the main gun, so called Beobachtungspanzer, which served most particularly in the mortar units.
Some Kanonenjagdpanzer remained into service with the Heimatschutztruppe until 1990.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Highly detailed tank with accurate Track detail.
Contains:
- 1x Kanonenjagdpanzer Tank Destroyer
Kanonenjagdpanzer Tank Destroyer
The Kanonenjagdpanzer (also known as Jagdpanzer Kanone 90mm, or tank destroyer, gun) was a German Cold War tank destroyer equipped with a 90mm anti-tank gun from obsolete M47 Patton tanks. Its design was very similar to that of the World War II Jagdpanzer IV.The first prototypes of the Kanonenjagdpanzer were built in 1960 by Hanomag and Henschel for West Germany and by MOWAG for Switzerland. Between 1966 and 1967, 770 units were built for the Bundeswehr, 385 by Hanomag and 385 by Henschel. Eighty of them were delivered to Belgium from April 1975 onward.
When the Soviets began deploying their T-64 and T-72 main battle tanks, the 90 mm gun was not capable of engaging them in long-range combat and the Kanonenjagdpanzer became obsolete. Although the producers claimed it could be rearmed with a 105 mm gun, between 1983 and 1985, 163 of these tank destroyers were converted into Raketenjagdpanzer Jaguar 2 anti-tank guided missile carriers by removing the gun, adding a roof-mounted TOW missile launcher and fastening further spaced and perforated armour on the hull. Some others were refitted into artillery observation vehicles by removing the main gun, so called Beobachtungspanzer, which served most particularly in the mortar units.
Some Kanonenjagdpanzer remained into service with the Heimatschutztruppe until 1990.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
144 Kanonenjagdpanzer.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
