MMShapeways
3D modeler,
Designer,
Artist
1/350 Scale Royal Navy Mushroom Vents in various sizes x36 (6 of each size), this a Large Set for Vents over 24" in diameter. There is a Smaller Mushroom Vent Set for Vents under 24" in diameter. Available in 1/72, 1/96, 1/128, 1/144, 1/192/ 1/200, 1/350 and 1/400. Check them out here! - http://shpws.me/Pcp7
1/350 RN 4 Inch Twin MKXVI Gun (x4) Now Available, check them out! - http://shpws.me/MNKn
englishgunner
Hello again, I hope this message finds you well. I am detailing my bridge structure and finishing off the searchlight tower and was wondering if you are able to do a 21 inch searchlight in 1/35 scale. I can make the bracket and stand so I would just need the light itself or if you can do the bracket too that would be great.
.
I also need double and single splinter mattresses for the lower and upper bridge. Do you know where they installed on both sides of the railings or just the outside,
many thanks, WillattachThumb279014 attachThumb279015
englishgunner
Sorry I tried using the message to contact but it kept telling me I was spam....
MMShapeways @daddysar36
http://shpws.me/QRYt
MMShapeways @daddysar36
Hi there, yes I can a set of 4 for you :-)
MMShapeways commented on 1/700 Scale Modern Italian Army Tank Set 2 by MMShapeways
November 23, 2018
MMShapeways @Chatticus_Finch
http://shpws.me/QRQ7
http://shpws.me/QRQ8
MMShapeways @Chatticus_FinchHi there, yep no worries should be able to sort it for you.
MMShapeways Thank you! :-)
MMShapeways commented on 1/600 Russian 2S25 Sprut-SD Tank Destroyer x10 by MMShapeways
September 9, 2018
MMShapeways Track done!
MMShapeways I have just been away for 5 weeks so haven't had chance to look at this yet, I made a start on it in 1/285 so should have it done in the next week. Sorry for the delay.
MMShapeways Hi there, ok, ok I'll do it! :-)
MMShapeways @Swtor Hi there, sorry for the late reply. Yep I can rescale for you. although I usually create each model specifically for each scale so it'll need some extra work. I should be able to do it over the next week or two if that's ok?
MMShapeways Hi there, is this ok? http://shpws.me/Qrx8
MMShapeways @guru150448 Hi there, sorry my German isn't very good. From what I can understand you would like 1x 1/100 5.2 cm/55 and 1x 10,5 SK L 40 with Shield?
WW2 Royal Navy 7" UP Launchers now available in all scales. Check them out here: - http://shpws.me/Qc5X
1/350 scale HMS Hood turrets now available without barrels for those wishing to use brass replacements, check them out here! - http://shpws.me/N1OO
1/350 HMS Dreadnought 12" MKX Guns x5 now available for the Trumpeter Kit. Highly detailed and accurate Turrets modeled from plans for correct dimensions and using many reference photographs fro all those little details. Also available in other scales, check them out here! - http://shpws.me/PnT3
1/350 HMS Agincourt 12" BL MKXIII Guns 1916 x7. Highly detailed replacements for poor quality ISW Turrets. Also available soon in 1/700 Scale with and without Blast Bags! - http://shpws.me/Pn4b
SMS Emden/Dresden 5.2 cm/55 SK L/55 Guns now available in most scales including 1/350 for the Revell SMS Emden or SMS Dresden kits, check them out here (link to 1/72 Scale, see My Shop for other scales)! - http://shpws.me/Phab
1/96 Scale Royal Navy Leander Class 6" Director now available. Soon available in most other scales, check it out here! - http://shpws.me/PgqL
MMShapeways commented on 1/600 4.7"/45 (12cm) QF Mark IX CPXVII Guns x8 by MMShapeways
November 26, 2017
MMShapeways Hi there, thanks for pointing that out! Yes there are 8 Guns in this set. I've put 8 in to maximize the cost for buyers as the price even if there were only 4 would on be a dollar or two cheaper :-)
MMShapeways Hi Miguel, nope it's correct they are 1/325 Scale, a customer requested them for a Frog kit I think that was 1/325 Scale! :-) do you need them in 1/350?
MMShapeways @Mortalius Hi there: http://shpws.me/PeAc
MMShapeways @Mortalius Hi there, sorry for the late reply, I'm away on holiday at the moment! in response to your question then yes I can scale it up to 1/100 for you, should be no problem. Will try and get it done later this week for you in time for the FREE SHIPPING on November 27th.
1/72 4.7"/45 (12cm) QF Mark IX CPXVII Guns x4. Highly detailed and accurate models ideal for most British WW2 Destroyers. Available soon in all scales, check them out here! - http://shpws.me/PcVu
1/450 HMS Vanguard Dual Purpose Twin QF 5.25" Guns now available, accurately shaped Mounts for the Hasegawa HMS Vanguard kit. Available in other Scales, check them out here! - http://shpws.me/PbNd
1/450 HMS Vanguard MKI* 15" Guns with the correct Battlecruiser circular Turret face (NOT the angular Queen Elizabeth Class type) and loads of extra detail for the best HMS Vanguard set anywhere. Available in 1/700, 1/600, 1/450, 1/350 and 1/192. Check them out along with all my other Royal Navy parts here! - http://shpws.me/Pbqo
FS Dunkerque and FS Strasbourg 330 mm/50 (13") Model 1931 Guns now available in 1/700, 1/400 and 1/350 Scales. Available with or without Blast Bags. Check them out here! - http://shpws.me/PaSE
1/350 Richelieu 380 mm/45 (14.96") Guns 1940 available now. Incredibly highly detailed Turret set modelled from builders plans for accurate sizing, these things are beasts! also available as seen in 1943 and with Blast Bags. Check them out here! - http://shpws.me/Pais
1/350 HMS Repulse 1941 MKI 15" Guns now available, available in most scales and covering different time periods. HMS Renown Guns also available. Check them out here! - http://shpws.me/P9wd
1/350 MKI* HMS Renown & HMS Repulse Guns 1916 now available, coming soon in most other scales, time periods and ship specific. Check them out here! - http://shpws.me/P98W
1/350 15" MKI 'R' & Queen Elizabeth Class Guns x4 now available, reworked for large scales, highly accurate with even more detail and adjustable barrels. Check them out here, available soon for specific ships and time periods. Beware poor quality 3d computer game imitations :-) - http://shpws.me/P7RV
First prpposal is BTR-80. This could be easly made by modifying 2S14 Zhalo 1/700 scale model that you already have.
Second proposal is chezh ShKH vz.77 'Dana' wheeled Artillery.
And last proposal is 'Sigma' Self propeled Howitzer thats also a Truck-based Artillery from israel. It's just a artillery vehicle that's based on 10×10 version hemtt.
As I said before, I want those vehicles at 1/700 scale. I will happily wait for your answer.
Please give me your messege!
Reference:
•BTR-80 - https://www.google.com/search?client=ms-android-samsung-ss&q=BTR-80&tbm=isch&sa=X&ved=2ahUKEwiwjMz4-YCAAxXECd4KHQ1SBg0Q0pQJegQIBxAB&biw=412&bih=789&dpr=2.63
•ShKH vz.77 Dana - https://alldrawings.ru/en/pictures/item/tank-152mm-shkh-dana-vz-77-drawings-dimensions-figures
•'Sigma' Artillery Truck - https://www.armyrecognition.com/defense_news_november_2022_global_security_army_industry/israel_testing_prototype_of_10x10_roem_sigma_as_successor_to_its_m109_self-propelled_howitzers.amp.html (Edited)