In mining we trust.

This is a representation of a Bitcoin that can be used to house a QR Code or NFC Tag that contains your Bitcoin Address.

This coin has the generally accepted BTC Sign, the year of the publishing of the Genesis Block, as well as a latin phrase that roughly translates to "Equality we can verify."

The back side of the coin has a large recess that can be used to hold any kind of engraving, NFC tag, or QR Code printout that you wish. I would suggest, once you place whatever you wish to keep safe on the back, to seal it with some durable clear epoxy or (if you happen to have it on hand) nice clear nail polish.

Once equipped with your desired address keeping method, the coin becomes an easy way to carry your bitcoins. It can also be used for your cold storage wallet that will be reasonably safe from most methods of damage. Engraving/stamping will be especially safe as it will be mostly fire proof...supposing you purchase it in some kind of metal of course.

Double up on your fiat freedom by purchasing the coin in the precious metal option of silver.

This model is also available with a Key Loop

Ring size that will go to cart: 12
If you wish to purchase a different size, select the size from the list below.

A very simple ring featuring a Pokeball as its centerpiece. It is simply a single band that meets the pokeball at the center. For measureable size reference, the pokeball is about 7mm across.

Available in the following sizes (please click the size to be brought to the appropriate purchasing site):
5
5 1/2
6
6 1/2
7
7 1/2
8
8 1/2
9
9 1/2
10
10 1/2
11
11 1/2
12

For reference: Ring Size Measurement and Conversion Chart

Protip: color the Pokeball with a bit of acrylic paint or nail polish to deepen the impact of the Pokeball itself. Do NOT use enamel paints on any of the plastics.

Note: this ring does NOT come fully colored. You must choose your printing medium and then paint it yourself (or keep as is). I suggest black detail so you won't have to worry about painting the line between the two halves.

Some people are hurt on the outside, but some have their pain somewhere a bit deeper. Wear this pendant to show your awareness of the kinds of pains that can't be seen.

This pendant was made in homage of a certain visual novel that celebrates ones overcoming their wounds that lie both on the inside as well as the outside.

Being at just over one inch square, it is the perfect size for either men or women.

The Pokeball is a common device used by Pokemon Trainers to capture desired Pokemon.

This particular model is designed to be hung off of a Pokedex, bracelet, necklace, cellphone, or even set of keys for easy access to your favorite Pokemon.

*Note* Does not actually contain any Pokemon nor is it capable of such. The pictured chain is also not included.

This charm has one hole on the top (underneath the loop) and another on the bottom to allow for draining of the powdered printing medium.

I wouldn't normally hang grass from my ears what due to the dirt, bugs, and possible grass stains but, with these Minecraft Grass Block earrings, you can avoid all those hassles while rocking your geek side.

The grassy textures on the sides were applied one color at a time to assure as clean and crisp colorations as possible. There is also a small (~2mm wide) tunnel for you to slide in a wire to hang the earrings from. This was done in order to keep the shape of the Grass Block as cubed as possible. I did not want any large loops coming off of the model itself as they take away from the aesthetic of the design.

Each earring is exactly 22x22x22mm and hangs in an isometric view to display all of the sides of the block at once.

This design is only offered in full color sandstone because, as you can probably imagine, without any of the color textures, this is a bare cube with a ~2.5mm wide tunnel born through one of the corners. There is also an open area on the bottom face to allow for draining of excess sandstone material. This was applied in order to decrease the weight of the earrings down to about 9.5 grams each.

Protip: I would reccommend hitting each earring with a little bit of clear acrylic paint in order to smooth out the surface and make the colors a bit bolder. The preview pictures above do not have any paint applied to them. Remember, many light coats are better than one thick coat.

By request, I have made a much (MUCH!) larger version of the Wounded heart Pendant. Considering that it would be impractical as a necklace in this size, I have removed the loop and cut off the rear half of the heart. The walls should be of significant thickness and will be able to stand up to any kind of reasonable use you may subject it to.