The Bike Mount for iPhone lets you attach your iPhone 3G / 3GS to your bike’s handlebars so you can track your GPS position, your speed, or distance travelled, while you ride.

Easy to mount and remove by a bayonet nut connector.

The bike mount is designed for bikes with 1" (24-26.5mm) handlebars.

Portrait or landscape mode, it’s your choice (see the pictures).

Tested and used during the last months by several people.

Please take a look also on my other iPhone cover designs and the iPhone 4 bike mount

video available ... see youtube link below.

plastic bell

flexible iPhone protection skin

fits perfect

easy to mount / unmount

please watch the video below

semiflexible iPhone protection skin

fits perfect

easy to mount / unmount

please watch the video below

iPhone 4 bike mount provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

This cover is the counterpart of iPhone 4 bike mount (case)

Inside the cover a 0.4-0.5mm PVC foil can be used as water protection.

iPhone 4 bike mount provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

This case has a coresponding cover iPhone 4 bike mount (cover)
The cover can be fitted mecanical to the case.

The case is also depending on 1inch bike mount or 1 1/4inch bike mount

---

Want to get a set?

+

---

bike mount for iPhone 3/ iPhone 4 case provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance. This is a subasembly of iPhone 4 bike mount assembly 1 1/4".

Designed for 1 1/4" bicicle bars.

---

Want to get a set?

+

---

iPhone 4 bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"

Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.

Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk

If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar

All necessary parts except PVC foil are included in this assembly.

Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.

This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)

Build from a twelve-sided dodecahedron with TopMod, the pentagons are linked to triangles and back again forming continuous paths. The surfaces are shadowing each other resulting in very nice shadows.

To build a suspended lamp light bulb and socket has to be inserted trough a hole. Adapter ring for E27 bulb socket serves as fitting.

To build a table lamp take use of Starfish lamp stand with adapter ring.

This video shows how to assembly the light source.

Build by linked thin hollow helixes this lamp takes full advantage of 3D printing freedom. The light distribution is homogeneous, the used white nylon material gives a warm light. Direct look to the lightsource is mostly hidden.

The model is an assembly of 3 stl parts merged to one. The main part consist of the hollow helixes, a base mount, and an adapter ring for E27 bulb sockets 10mm (available at home depot, Hornbach, OBI, etc. see picture). The main part has to be cleaned carefully by compressed air to blow out all powder. Tumble finishing is possible.

All parts necessary to build a light source are included in this assembly, excepting a lamp stand, bulb and cable. Please take a look on one of the pictures for an lamp stand example.

I’m happy with this model as table lamp and hope you enjoy it ! It's an ideal gift.

If you need a longer adapter ring: Adapter ring for E27 bulb socket 20mm

Looks best in WSF Polished.

Easy to mount belt disk, part of my eBike project with separate adapter ring, designed for wheels with 32 spokes and 12mm HTD 3M belt drive. The disk has 180 tooths. The only thing that sometimes has to be adapted is the inner conus of the separate adapter ring. This part is downloadable here

downloadable adapter ring for my eBike project belt disk.
Sometimes the inner conus has to be adapted. Please download the stl and modify it for your requirements.

related parts: belt disk 32 spokes wheel
belt disk 36 spokes wheel

Adapter ring for helix lamp and E27 bulb socket.

This part can be downloaded and modified if necessary.

iPhone 4S bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.

Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk

If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar

All necessary parts except PVC foil are included in this assembly.

Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.

This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)

Adapter ring for E27 bulb socket. See Starfish lamp

Easy to mount belt disk, part of my eBike project with separate adapter ring, designed for wheels with 36 spokes and 12mm HTD 3M belt drive. The disk has 180 tooths and is for the right side. See for the left side. The only thing that sometimes has to be adapted is the inner conus of the separate adapter ring. This part is downloadable here

Easy to mount belt disk, part of my eBike project with separate adapter ring, designed for wheels with 32 spokes and 12mm HTD 3M belt drive. The disk has 180 tooths and is for the right side. See for the left side. The only thing that sometimes has to be adapted is the inner conus of the separate adapter ring. This part is downloadable here