A small dish suitable for a dipping sauce, mints, pins, etc. This would make a wonderful wedding favor, filled with candy and wrapped in gauze. Beautiful in glazed ceramic, or try it in full-color sandstone for something even more unique. (Full-color sandstone should be given a clear coating to protect the surface and bring out the colors - try Pledge acrylic floor polish, for instance.) Designed with ceramics in mind (they are food-safe), but printable in a wide variety of materials. Contact me if you would like some variation on this (e.g. bigger, thinner, with more or less twist, or different coloring).

A small vase with a star-shaped opening, designed to be printed in the ceramic materials, but available in other materials also. Suitable for small dried or silk arrangements, since the interior may not be completely glazed. Would make a charming favour for your wedding guests, or a dainty centerpiece for small tables.

A delicate ornament with a shape reminiscent of the bracts of a thistle.

A die with a stylized petal pattern extending from the centre to the corners.

A fun cat pendant with lightly raised borders. Available also with the the leopard print on request. Note that the full-color version illustrated is only available with the choice of full-color sandstone as the material. (A clear smooth coating such as nail polish will brighten the colors in this material.) Other materials will be one solid color.

(Based on an icon from http://icons.mysitemyway.com, from their "Magic Marker Icons" set.)

A ring with two trumpets resembling flowers with ruffled "petals".

A tea light ring with flaps that remind me of tree ears (a kind of fungus that grows on tree trunks). It has thick enough walls to be printable in the matte white glass, I think (3mm), but could also work in other materials, such as transparent detail, or sandstone if you like the shape and want something a bit cheaper.

Another version of the Thistle Tea Light Cover with thinner walls (1.5mm instead of 3mm). Suitable for use only with LED tealights.

Tea light ring (but be careful of heat - white, strong and flexible is supposed to be OK to 80 deg. C/176 deg. F). Connections are about 1mm thick or more.

The snowflake is a 3D version of a snowflake in glyphomosaic.png, a file that comes with Meshlab, credited to "RANDIJROST" (I think).

Critter has a flat base to rest on, with a hollowed interior and hole in the bottom. Could be used as a finger puppet!

(Shown with the MS Windows water lily image supplied as sample wallpaper.)

Critter with a marbled pattern with Voronoi Crackle "noise". (Hollow without a hole to allow removal of support material - but wall thicknesses are all at least 3mm.)

A dainty and elegant pendant similar to my shell ornament. I think it would probably look great in stainless steel. The hanging loop is 1.5mm thick, and all wall thicknesses are over 1mm.

Like the other Shell Ornament, but twists into itself another 180 deg. Loop hole is 3mm in diameter; wall thickness is ~1.73mm at edge, tapers to ~1mm (rib depth) in the centre.

A great way of expressing longer sentiments - up to 244 characters with a 8cm diameter. Your text will be repeated as many times as it will fit (with at least 0.5cm separation between each repetition). Width of the band is 1.1cm, and the text height is ~0.5cm.

For a cheaper option, see my Mobius Text Napkin Ring (http://www.shapeways.com/model/182784/mobius_text_napkin_ring.html?gid=ug28511).

NOTE: It's possible that this isn't printable in stainless steel, as the wall thicknesses are below the recommended limit of 3mm for this material.

A version of the spiral ornament with fewer twists and a thicker surface (3mm). May be suitable for printing in Milky White Matte Glass and/or Stainless Steel.

Same as Fractal Heart Bauble 1, with another one of my Apophysis flame fractal patterns.

Contains a smaller version of itself hanging freely by a loop. Outer loop has 4mm hole and is 2mm thick, inner loops are ~1.6mm thick, with ~0.7mm of clearance.

Another fun flower with spiralling petals. Hole in the loop is 2mm.

This may be a bit fragile - the stems are about 1mm (or less) where they meet the sphere in the middle, but it is also supported where the bars intersect between the quarters.

Loop hole is 4mm in diameter. Wall thicknesses of ~2mm. The walls aren't thick enough printing in glass, but I've uploaded a new version that should be at http://www.shapeways.com/model/111529.

Ring has 18mm inside diameter. The inner band is 1mm thick and the edges are 2mm thick.

(The droplet shape was taken from MS Windows Wingdings font.)

A pretty bangle that looks like two strips twisted together, but is actually a single continuous strip which goes around twice. Inside diameter is 6.5cm, the band width is 5.6mm, and the thickness is 1mm.

A slightly more robust version of Shell Ornament 2, with thicker ribs and a bit less rotation. The rib width is less than 0.7mm at the centre, but the rib depth is ~1.3mm. I expect some fusing and loss of detail in the centre, but not too much, I hope. The previous version is still available at http://www.shapeways.com/model/66469/shell_ornament_2.html.

Same as Fractal Heart Bauble 1, with another one of my Apophysis flame fractal patterns.