I Heart Engineering

Designs by IHeartEngineering
Contact Designer
Designing things for the future

IHeartEngineering is selling 9 products in Robotics section

Per Page: 12 36   View: Grid | List
Small Camera Servo Mount
by IHeartEngineering
This is a servo mount for the Point Grey Flea2 and Chameleon Cameras. These cameras are fairly popular for robotics since they have a global shutter which is often critical for machine vision tasks.

Designed for HiTec HS-325HB Servo.
The mounting plate can be connected to the servo using M1.6 screws or M2x6mm screws with nuts. You could probably modify the design to work with imperial sizes if you wanted to.
 
(2)  
  •  
From: $6.85
 
Heavy Duty Servo Mount for Ultrasonic Sensor
by IHeartEngineering
Compatible with the Parallax Ping))) sensor and the Hitec HS-325HB Servo.

This part requires drilling and fasteners after printing.

This is the thicker version which should be a bit stronger, however the activity light is not viewable.

Grey Robust is the recommended material.
 
(5)  
  •  
From: $12.60
 
Sonar Servo Mount
by IHeartEngineering
The part allows you to mount the Parallax Ping))) sensor on the Hitec HS-325HB Servo. It has been optimized for Shapeways printing with the Grey Robust material.

The activity light and connector pin outs are visible.

This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.

YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8
 
(4)  
  •  
From: $7.52
 
Laptop Latch Pin
by IHeartEngineering
Laptop Latch pin, needs to  be tapped with M3 threads for use in latch assembly.
 
(0)  
  •  
From: $4.93
 
TriK Tripod Adapter
by IHeartEngineering
3D printed Tripod adapter prototype compatible with the Kinect and most tripods. This is not an officially licensed Microsoft accessory but is designed to be compatible. Note: This adapter is designed for semi-permanent installation. Repeated insertion and removal of the thread forming screws may damage the case.

Requires 1/4-20 nut and plastic thread forming screws.
 
(2)  
  •  
From: $15.93
 
Laptop Latch Parts
by IHeartEngineering
Plastic Latch Components. Grey robust has been tested, White Strong & Flexible may also work well.
Does not include metal latch pin, M3 threaded rod or M3 nut.
 
(3)  
  •  
From: $12.07
 
Robot Pencil
by IHeartEngineering
Upgrade your pencil with a robot head.
 
(0)  
  •  
From: $6.17
 
Pt. Grey Camera Mount
by IHeartEngineering
This is a camera mount for attaching a Pt. Grey Flea or Chameleon Camera to a Robotis AX-12+ Servo.
 
(0)  
  •  
From: $4.53
 
Tripod Adapter for Robotis Dynamixel AX-12+
by IHeartEngineering
This adapter connects a Robotis Dynamixel AX-12+ servo to a standard tripod. Requires one 1/4-20 nut and four M2x12mm socket head cap screws.
 
(0)  
  •  
From: $8.82
 
Shop Details
Engineering Research and Development

Expertise

  • 3D modeler
  • Product designer
  • Artist
  • Maker
  • Artisan
  • Lots

Shop Sections