This is a stand for a Safecast Onyx Geiger counter from their kickstarter http://www.kickstarter.com/projects/seanbonner/safecast-x-kickstarter-geiger-counter This should also be compatible with the future version from International Medcom.

This is a servo mount for the Point Grey Flea2 and Chameleon Cameras. These cameras are fairly popular for robotics since they have a global shutter which is often critical for machine vision tasks.

Designed for HiTec HS-325HB Servo.
The mounting plate can be connected to the servo using M1.6 screws or M2x6mm screws with nuts. You could probably modify the design to work with imperial sizes if you wanted to.

This is part 2 of 2 for building a cleanroom inlet fan that works with shopvac air filters.

Grey Robust or Alumide is recommended.

See here for more details
http://www.iheartrobotics.com/2010/02/this-new-lab-diy-cleanroom.html

Compatible with the Parallax Ping))) sensor and the Hitec HS-325HB Servo.

This part requires drilling and fasteners after printing.

This is the thicker version which should be a bit stronger, however the activity light is not viewable.

Grey Robust is the recommended material.

The part allows you to mount the Parallax Ping))) sensor on the Hitec HS-325HB Servo. It has been optimized for Shapeways printing with the Grey Robust material.

The activity light and connector pin outs are visible.

This part will require drilling and fasteners. Two M3x5mm and two M2x6mm screws are suggested. If you don''t have the necessary taps you can use nuts.

YouTube assembly Video is available here. http://www.youtube.com/watch?v=h5oXFVhrQr8

Metric Socket Set
Part # Size
26590 Set of 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm

Requires 3 #6x1/2" wood screws for mounting. Grey Robust material is suggested.

This ia a modular case for the Arduino Microcontroller. It has been designed to fit 6 across in a 1U Rack with a little room to spare. M3 Screws are suggested and not included. The holes have not been drilled or tapped, so you can use #4-40 screws as well.

Metric Set
Part # Size
26307 0.71mm
26309 0.89mm
26313 1.27mm
26315 1.5mm
26320 2.0mm
26325 2.5mm
26330 3.0mm
26340 4.0m

Imperial Set
Part # Size
26307 0.028"
26309 0.035"
26313 0.050"
26316 1/16"
26320 5/64"
26323 3/32"
26327 7/64"
26331 1/8"

Requires 3 #6x1/2" wood screws for mounting. Grey Robust material is suggested.

3D printed Tripod adapter prototype compatible with the Kinect and most tripods. This is not an officially licensed Microsoft accessory but is designed to be compatible. Note: This adapter is designed for semi-permanent installation. Repeated insertion and removal of the thread forming screws may damage the case.

Requires 1/4-20 nut and plastic thread forming screws.

Plastic Latch Components. Grey robust has been tested, White Strong & Flexible may also work well.
Does not include metal latch pin, M3 threaded rod or M3 nut.

Upgrade your pencil with a robot head.

This is a camera mount for attaching a Pt. Grey Flea or Chameleon Camera to a Robotis AX-12+ Servo.

Approximately 2" long barrette clip and Lego part not included. Assemble with hotglue.