We found 24 products by hoffy
by
hoffy
U3000 scale frame 1:13,5 with front spring holder for springs with 12.5mm inner diameter and central gear box monting points.
by
hoffy
unimog front cross beam smal for 55mm wide frame width scale 1:13,5. This cross beam is necessary to complete the Unimog frame.
by
hoffy
Unimog rear cross beam for 55mm wide frame scale 1:13,5, You need this cross beam to complete the Unimog frame.
by
hoffy
Unimog cross beam with rear spring and shock holder scale 1:13,5 for Unimog frame.
by
hoffy
This is the portal case for the U5000 1:13.5 portal axle. This will fit to all standard 1.9" rims.
For one front axle you would need 2 times this case, additionaly 2x portal cover, 2x steering arms and 2x C-Hub as well as the axle it self.
by
hoffy
This steering arm is necessary to istall the portal case to the C-Hub
by
hoffy
This portal case is necessary to complete the portal axle. To this portals will fit all standard 1.9" rims.
You need two of this to complete the portals of one axle.
by
hoffy
This portal cover is necessary to complete the portal axle. This portal cover is designed to be weight up with plumb. To this portals will fit all standard 1.9" rims. You need two of this to complete the portals of one axle.
by
hoffy
beadlock wheels for RC trucks and cars with 10 lugs M1.6, D=52 / B=24 / Offset=+4 should fit to all 1.9" tires and to 3 Racing portals for AX10 / SCX
by
hoffy
This linkage and shock holder is designed to fit to the Tamyia XC-01 / CC-01 rear axle. Only smal modification at the axle are necessary. The holder is designed to install both lower links (with M3 screes, hole is 2.5mm) and both upper links (holes are 2.5mm) as well as both shocks at the rear (hole is 1.5mm). If you want to install a central Y-Link, instead of two separate upper links, have a look into my shop, there is another version as well.
by
hoffy
This linkage and shock holder is designed to fit to the Tamyia XC-01 / CC-01 rear axle. Only smal modification at the axle are necessary. The holder is designed to install both lower links (with M3 screes, hole is 2.5mm) and a central ball (hole is 2.5mm) for an Y-Linkholder, as well as both shocks at the rear (hole is 1.5mm). If you want to install two upper links seprat, instead of an Y-Link, have a look into my shop, there is another version as well.
by
hoffy
This Link and damper / shock holder is designed to fit unter the RC4WD Beowuld axle. The hole for the linkage is 2.5mm, and the hole for the damper / shocks at the front od the holder is 1.5mm.
by
hoffy
This Y-Linkholder with 45 degree, is designed to fit on a 6mm ball and M3 thread rod.
by
hoffy
This Y-Linkholder is designed to fit on 4.7mm balls (Tamiya define the balls as 5mm) and M3 thread rod.
by
hoffy
This is a adapter to install a 540 brushless sensored motor to several screwdriver 1-speed or 2-speed gear boxes. If you have any questions or need more information, please feel free to contact me.
by
hoffy
This is a adapter to install a 540 brushless sensored motor to several screwdriver 1-speed or 2-speed gear boxes. If you have any questions or need more information, please feel free to contact me.
by
hoffy
This is a transfer gear box for RC trucks and cars. This transfercase fits to several 1-speed and 2-speed screw driver gear boxes. For more details feel free to contact me.
by
hoffy
This portal axle was designed to fit under a 1:12 - 1:13,5 scale Unimog. BamaTech Diff is required with extra long pinion gear. All standard 1.9" rims sould fit to this axle. The width over all is 170mm. With 5mm Hex and 0 Offset rims, a total width of appr. 195mm is possible. So this axle will fit perfekt unter the Tamiya U406 or Dickie U300 body.
Portal axles for other diffs are comming soon. So stay tuned!
by
hoffy
This portal axle was designed to use the BamaTech Diff and min. standard 1.9" rims. The width over all is 170mm. With 5mm Hex and 0 Offset rims, a total width of appr. 195mm is possible. So this axle will fit perfekt unter the Tamiya U406 or Dickie U300 body.
Portal axles for other diffs are comming soon.
by
hoffy
This is a transfer gear box cover for the transfer gear box. This can be used for RC trucks and cars. This transfercase cover is designed to attached a shifting mini servo for the 2-speed screw driver gear boxes. For more details feel free to contact me.
by
hoffy
This is the axle tube for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. Will come soon.
by
hoffy
This is the diff housing for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. Will come soon.
by
hoffy
This is the push tube (Schubrohr) for the scale Unimog portal axle with Traxxas 1:16 steal diff. Data needs to be updated with higher definition. Will come soon.
Shop Details
Expertise
- 3D modeler
