cooldjez Design

Designs by cooldjez
www.onlineconversion.com/ring_size.htm. You can use this site to convert international ring size standards.

We found 33 products by cooldjez

by cooldjez
Unfortunately this ring cannot be printed. This is due to the fact that the resolution of the steel diamonds is to high for the printer. Maybe in ...
 
(0)  
  •  
Not For Sale
 
by cooldjez
Unfortunately this ring is non-printable.
 
(1)  
  •  
Not For Sale
 
by cooldjez
A variation on my Ring With and Without balls designs.Contact me if you want a size outside of the co-creator range. I can also provide this ring o...
 
(6)  
  •  
From: $26.05
 
by cooldjez
The two rings above and below are supported by "scaffolding". This also proivides the fit around the finger.Contact me if you want a size outside o...
 
(8)  
  •  
From: $26.06
 
by cooldjez
A new take on the engagement ring. The large diamond (8mm) is also made of steel. This ring was first designed as Ring - Diamonds, but during the t...
 
(12)  
  •  
From: $26.05
 
by cooldjez
This ring consists of 4 strands wound together with a twist at the end.Contact me if you want a size outside of the co-creator range. I can also pr...
 
(9)  
  •  
From: $26.05
 
by cooldjez
This is a nice bold ring.The last photo (on blue) has had an extra polish job. This is not how the ring looks after manufacturing.Contact me if you...
 
(8)  
  •  
From: $26.05
 
by cooldjez
Size: 19.5mm Co-creator coming soon! This ring comes in two variantions. This is the sharp model. Also check out my Grid1 Round. Contact me if yo...
 
(5)  
  •  
From: $26.05
 
by cooldjez
Please take into account that if you want to set a 3mm gemstone, the hole needs to be 0.2mm smaller (gemstone or diamond not included in the pricin...
 
(10)  
  •  
From: $26.05
 
by cooldjez
Please take into account that if you want to set a 3mm gemstone, the hole needs to be 0.2mm smaller (gemstone or diamond not included in the pricin...
 
(7)  
  •  
From: $26.05
 
by cooldjez
Custom 19.3mm edition.This ring consists of 4 strips that are tightly wound.
 
(2)  
  •  
From: $26.05
 
by cooldjez
Size: 17.75mm / C10.5.This model is only the inner part of my wedding rings set.Contact me if you want a different size.
 
(4)  
  •  
From: $26.06
 
by cooldjez
Not yet printable!I went a bit overboard with my original Big Diamond design. I got a suggestion to do a wireframe version, so here it is!Contact m...
 
(0)  
  •  
Not For Sale
 
by cooldjez
This ring is a further development on my earlier Columns design, but because that didn't have an inside ring, it looked very fragile.Contact me if ...
 
(9)  
  •  
From: $26.05
 
by cooldjez
Wirl consists of 4 strands, each 1mm thick. At several points the strands interconnect, so that the shape is fixed.Contact me if you want a size ou...
 
(14)  
  •  
From: $26.05
 
by cooldjez
I was thinking about pearls when I designed this ring, but it is just as cool to have stainless steel balls. It is almost a warped ball bearing.The...
 
(11)  
  •  
From: $26.05
 
by cooldjez
Co-creator coming soon! Please let me know when you have a special request. These cufflinks have a hole on each side shaped as a letter. So you can...
 
(3)  
  •  
From: $26.04
 
by cooldjez
Co-creator coming soon! These cufflinks have a hole on each side shaped as a letter. So you can provide two initials for these customised cufflink...
 
(1)  
  •  
From: $26.05
 
by cooldjez
This ring consists of three 1mm plates that are bend to contain one ball.Contact me if you want a size outside of the co-creator range.I can also p...
 
(6)  
  •  
From: $26.05
 
by cooldjez
This ring consists of three 1mm plates that are bend. The name comes from the vertical connecting bar.Contact me if you want a size outside of the ...
 
(6)  
  •  
From: $31.28
 
by cooldjez
With this I wanted to make a non-circular ring. The balls of the ring rest on the finger.Contact me if you want a size outside of the co-creator ra...
 
(8)  
  •  
From: $26.06
 
by cooldjez
;-) Size: 18.0mm / C11OK, so I probably went a bit overboard with this design. I was just writing a comment to my design 'Ring - Diamond' and I sta...
 
(0)  
  •  
From: $50.41
 
by cooldjez
Size: 19mm. Co-creator coming soon! OK, this is a bit out there and to be honest I am not sure this ring is going to be very comfortable. The insp...
 
(0)  
  •  
From: $26.05
 
by cooldjez
This cufflink was inspired by my Bead 1 design.Please Remember to order two items as the model/price is only for one cufflink.
 
(2)  
  •  
From: $26.05
 
by cooldjez
This ring consists of three 1mm plates that are bend to contain three balls.Contact me if you want a size outside of the co-creator range. I can al...
 
(9)  
  •  
From: $26.05
 
by cooldjez
Size: 19.5mm. Co-creator coming soon! First of all a change from my normal sharp and edgy ring designs. Secondly I was looking for a design that w...
 
(0)  
  •  
From: $26.05
 
by cooldjez
Size: 19.5mm. Co-creator coming soon! This model is a combination of a very sharp edged outer ring combined with an organic and flowing middle pie...
 
(3)  
  •  
From: $26.05
 
by cooldjez
This ring consists of 4 strips that are tightly wound.Contact me if you want a size outside of the co-creator range. I can also provide this ring o...
 
(8)  
  •  
From: $26.06
 
by cooldjez
Size: 19.5mm / C14.This model is only the outer part of my wedding rings set.Contact me if you want a different size.
 
(2)  
  •  
From: $26.06
 
by cooldjez
Size: 19.5mm Co-creator coming soon! This ring comes in two variantions. This is the round model. Also check out my Grid1 ring. Contact me if you w...
 
(3)  
  •  
From: $26.06
 
by cooldjez
Originally this was the test version of "Ring - With Balls". As it was well received, I have also made this model available.Contact me if you want ...
 
(11)  
  •  
From: $26.06
 
by cooldjez
Please take into account that if you want to set a 3mm gemstone, the hole needs to be 0.2mm smaller (gemstones or diamonds not included in the pric...
 
(5)  
  •  
From: $26.06
 
by cooldjez
This is an awesome looking ring, but it's still comfortable to wear.Contact me if you want a size outside of the co-creator range. I can also provi...
 
(14)  
  •  
From: $26.05
 
Shop Details
Welcome to my shop. I specialize in jewelry with a strong focus on rings. Most of the models I am selling at the moment are printable in Stainless Steel.

Expertise

  • 3D modeler
  • Animator
  • Designer
  • Product designer