You must be logged in and verified to contact the designer.
Product Description
A gardenhose connector built into a bottle-cap.
I just wanted to try this out. The usage is probably very limited (customized garden sprinklers/showerheads from PET-bottles).
I know that this adapter can be made with an actual gardenhose connector and some hotglue (or better yet, plumbing adapters) so it gets attached to an existing bottle cap but I just want to try this out and decided to make it available for order.
It is an UNTESTED PROTOTYPE at this point but I think I've got it all right at the first go. I'm a little worried that the printed material might not be strong enough for the thread. It might break when the cap is screwed in too tight.
The PET bottles should have a thread with approx. 25mm outer diameter and 3mm pitch (3mm between each "lap") to be compatible with this adapter. I used a "standard"(/Coca-Cola Company) PET bottle as my design reference since a lot of companies seem to use that same design.
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: