Train-ferry vanTcefs, former Gbtmks 66, Diagramm E277, owned by German Federal Railway, 4-wheel van with end doors and sliding roof, built in 1964 for service between the Continent and Great Britain
Additional parts needed- 2 pcs weelset Graham Farish 379-412
- 2 pcs close coupler motion link PEHO #005 (www.peho-kkk.de), combine with couplers by Dapol, Fleischmann or Minitrix, while GraFar couplers don't fit
- 4 pcs anchors KUSWA #nf206 (www.kuswa.de)
- 2 pcs shunter footstep KUSWA #nf205 (www.kuswa.de)
- 2 pcs ladder
- Spring steel wire 0.15mm
- Bronze wire 0.3mm
- Sheet (metal or plastic) 0,25mm x 1mm for footboards
- 2 pcs 6mm screw nuts for ballast
- Decals http://www.modellbahndecals.de #6578 (Years 1964-1968) or
- Decals http://www.modellbahndecals.de #6579 (Years 1964-1980)
(order decals 1/160 with comment "1/148")
Construction Manual- Clean the model carefuly, get best results by using an ultrasonic cleaning system
- To protect damageable parts the roof is sprued to the bottom of the railcar body. Disjoin the 4 sprues.
- Mount weelsets, to prevent damages to axle guide stays and brake shoes
- Mount additional parts:
- The close coupler motion link has a spacer, which should be removed for standart buffer distance. The short coupler can be assembled in different positions to get a closer buffer distance.
- Two ladders habe to be assembled to each left end door
- The anchors have to be assembled to drillholes at the corners of the car
- The shunter footsteps have to be glued to the left of each headstock
- Two handles have to be bend and assembled to drillholes at the corners of the car
- Eight handles belong to the 4 sliding doors
- Two handles where needed under the roof over the top of the ladders
- Four arrestor hooks have to be assembled under the roof corners
- Four handles have to be bend and assembled to drillholes under the buffers
- Unter the left sliding door two footboard supports have to be assemled
- Two footboards have to be mounted
- At the operator's platforms guard railings have to be assembled
The car body has to be colourd in brown, RAL8012 "rotbraun"The roof has to be colourd in grey aluminium