Deskpet Robot Body

Printed and motors mounted
 
Designed by: Robotguy   contact | Shop: Robotguy
1.8 w x 1.9 d x 1.1 h in cm |

Robot body for GM10 motors and wheels from Solarbotics or Pololu. The part was made to be easily reproduced with a one-part silicone mold. Be sure to use Transparent Detail if you plan to make a mold.

I have purchased the part in WSF and verified fit of the motors. There is a tiny bit of trimming necessary to fit the motors, but nothing difficult. You will also need to drill a small hole in the bottom front to use as a caster (see assembly model).

A preliminary PCB is available at robotguy.net/Deskpet_PCB.zip (in Cadsoft Eagle format), or use a Baby Orangutan controller.

 Permalink
 Report abuse
 0
 
Comments  0
  $
Select material
 
Keywords