sunlink

Transformers fan who's always looking for ways to make them better and funner for everyone.
by sunlink
Inspired by Marvel's G1 comic version of Shockwaves laser hand comes this add-on accessory for your Fall of Cybertron Shockave. Laser hand fits on either hand.
 
(5)  
  •  
From: $3.97
 
by sunlink
Inspired by the original G1 Sideswipe / Red Alert weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(9)  
  •  
From: $5.99
 
by sunlink
Inspired by G1 Insecticon Sharpnel's mandibles comes these upgrades for Fansproject CA-03 Thundershred. These use a 3mm clip so I highly recommend printing these in any of the Strong and Flexible materials.
 
(1)  
  •  
From: $7.76
 
by sunlink
Inspired by the original G1 Prowl / Bluestreak / Smokescreen weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(4)  
  •  
From: $6.37
 
by sunlink
Inspired by G1 Insecticon Sharpnel's mandibles comes these upgrades for Fansproject CA-03 Thundershred. These use a 3mm clip so I highly recommend printing these in any of the Strong and Flexible materials.


Inspired by G1 Shrapnel hand gun comes this upgrade weapon for FansProject CA-03 Thundershred. The weapon handle has been specifically designed for this one particular figure.

Inspired by G1 Kickbacks hand gun comes this upgrade weapon for FansProject CA-05 Backfiery. The weapon handle has been specifically designed for this one particular figure.

Inspired by G1 Bombshells bug horn that fits onto FansProject CA-04 Stormbomb. This is a two part accessory kit with the horn (larger piece) fitting into the connector which fit's onto Stormbomb.


Inspired by G1 Bombshells hand gun comes this upgrade weapon for FansProject CA-04 Stormbomb. The weapon handle has a tiered 5mm and 4mm peg on it.
 
(1)  
  •  
From: $22.28
 
by sunlink
Inspired by Generations One (G1) Track's weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(5)  
  •  
From: $7.45
 
by sunlink
Inspired by the original G1 Prowl / Bluestreak / Smokescreen weapon. This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(4)  
  •  
From: $6.37
 
by sunlink
Use these custom antenna's for Animated Arcee.  This is for both the antenna and G1 style ears. 

Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice.

Note #2: The G1 Style Ears is of the Original design - which does not fill in the side head gaps.

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(1)  
  •  
From: $5.68
 
by sunlink
KaPow!  Warpath needs more weapons so Wheeljack was happy to build him some new weapon systems to help defeat the Decepticons.  The KaPow weapon system allows you to mount the weapon in Warpaths hidden fist while in robot mode.  All KaPow weapon systems utilize a peg that fits standard 5mm holes so even if Warpath isn't using a KaPow weapon someone else can!
 
(1)  
  •  
From: $4.81
 
by sunlink
Use these custom antenna's for Animated Arcee.  Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice.

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(1)  
  •  
From: $2.97
 
by sunlink
Inspired by the original G1 Groove's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(4)  
  •  
From: $5.98
 
by sunlink
G1 inspired Ravage missile pods. Fits Classics Ravage and other toys that have a 5mm peg hole.
 
(2)  
  •  
From: $6.75
 
by sunlink
Botcon 2011 Shattered Glass Galvatron is missing something.  He's missing his arm cannon!  Now you can make SG Galvy look more G1-ish with this arm cannon.


 
(1)  
  •  
From: $10.79
 
by sunlink
3mm clip system Chaingun design. 

Only Print in any "Strong and Flexible" materials
 
(2)  
  •  
From: $4.71
 
by sunlink
Inspired by the original G1 Hot Rod's  weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole and Classics Rodimus 4mm peg hole.
 
(2)  
  •  
From: $6.09
 
by sunlink
Inspired by G1 Bombshells bug horn that fits onto FansProject CA-04 Stormbomb. This is a two part accessory kit with the horn (larger piece) fitting into the connector which fit's onto Stormbomb.
 
(0)  
  •  
From: $7.89
 
by sunlink
Inspired by Generations One (G1) Kup's toy weapon.  This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(2)  
  •  
From: $5.49
 
by sunlink
Inspired by the original G1 Cyclonus weapon this updated version has a handle that will fit a 5mm hole that in today's modern Classics / Universe Transformers
 
(3)  
  •  
From: $6.46
 
by sunlink
3mm clip system Weapons Pack #1

Includes:
x1 Chaingun + clip
x1 Missile Pod + clip
x1 Pred Laser + clip
x1 4 Gun Pod + clip
x1 Sword + clip

Only Print in any "Strong and Flexible" materials
 
(0)  
  •  
From: $12.83
 
by sunlink
If you lose the 3mm ball and clip or just want an extra one, here you go.

Only print in "Strong and Flexible" type

 
(0)  
  •  
From: $1.85
 
by sunlink
These were inspired by G1 Wheeljacks cartoon shoulder launcher and fits on the updated Classics / Generations Wheeljacks 3mm shoulder clips.


Recommended Material Type: Any Strong and Flexible due to the integrated clip system.
 
(3)  
  •  
From: $5.95
 
by sunlink
Inspired by G1 Kickbacks hand gun comes this upgrade weapon for FansProject CA-05 Backfiery. The weapon handle has been specifically designed for this one particular figure.
 
(0)  
  •  
From: $5.33
 
by sunlink
Inspired by the original G1 Fortress Maximus Cog weapon.  This pistol has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(3)  
  •  
From: $6.34
 
by sunlink
Inspired by the original G1 Scourge's weapon. This version has a handle that will fit today's modern Classics / Universe Transformers that have a 5mm peg hole.
 
(1)  
  •  
From: $6.86
 
by sunlink
Inspired by the original G1 Blurr's weapon. This version has a handle that will fit today's modern Classics / Universe / Generations Transformers that have a 5mm peg hole.
 
(3)  
  •  
From: $7.19
 
by sunlink
This is a replacement cow-catcher cannon for Classics Onslaught. Inspired by the original G1 Fortress Maximus leg cannons. This will work perfectly with TFCon's Stronghold upgrade kit.
 
(0)  
  •  
From: $11.61
 
by sunlink
These were inspired by G1 Wheeljacks toy shoulder launchers and fits on the updated Classics / Generations Wheeljacks 3mm shoulder clips.
 
(3)  
  •  
From: $9.59
 
by sunlink
These are replacement tank barrel cannons for Classic Onslaught.  After TFCon announced their 2011 Stronghold exclusive I wanted to design replacement tank barrel cannons for Stronghold.  Since Stronghold is supposed to be Fortress Maxmius I modeled these replacement barrel cannons after Fort Max's hip cannons.

Due to the clip system on these barrels I suggest purchasing in any "Strong & Flexible" type materials.
 
(1)  
  •  
From: $6.30
 
by sunlink
New cab top for Classics Optimus Prime or Classics Ultra Magnus.  There is a 3mm pole on the back end so a (or multiple) 3mm clip weapon systems can be mounted in either robot or vehicle mode.

Version 2 - Slight longer than the v. 1 models and has a redesigned front.
 
(0)  
  •  
From: $7.17
 
by sunlink
The Cross-bow was inspired and designed specifically for the Botcon 2011 themed Animated Transformers.  Twenty four specially created and brown dyed Cross-bows were handed out to attendees of the convention.  Now here's your chance to get your own Cross-bow weapon to equip your favorite robot.  It should fit any 5mm hand hole. 
 
(2)  
  •  
From: $6.71
 
by sunlink
These weapons are made with the Transformers Prime Legions (Cyberverse) figures in mind. These have 3mm pegs and/or holes to combine with other Legion weapons. This Triangle Gun was inspired by the weapon used by the Vehicon army.
 
(0)  
  •  
From: $3.65
 
by sunlink
These are replacement tank barrel cannons for Classic Onslaught.  Modeled aftered the G1 Onslaught toy's cannon barrels.

Due to the clip system on these barrels I suggest purchasing in any "Strong & Flexible" type materials.

 
(1)  
  •  
From: $6.77
 
by sunlink
Inspired by G1 Bombshells hand gun comes this upgrade weapon for FansProject CA-04 Stormbomb. The weapon handle has a tiered 5mm and 4mm peg on it.
 
(0)  
  •  
From: $5.35
 
by sunlink
Inspired by the toy version of the arm guns that Ramjet uses.  Fits a standard 5mm peg hole.
 
(2)  
  •  
From: $11.29
 
by sunlink
Use these custom antenna's for Animated Arcee.  This is for both the antenna and G1 style ears. 

Unscrew the screw in the back of her head.  Remove the front of the head and slip these antennas between the two head halves and screw the screw back in. 

Note: This will cause the eyes to be offset but it's hard to notice.

Note #2: The G1 Style Ears is of the v2 design - which does fill in the side head gaps.

Recommended Material Type: White Strong & Flexible (and other S&F variants)

 
(3)  
  •  
From: $5.94
 
by sunlink
KaPow!  Warpath needs more weapons so Wheeljack was happy to build him some new weapon systems to help defeat the Decepticons.  The KaPow weapon system allows you to mount the weapon in Warpaths hidden fist while in robot mode.  All KaPow weapon systems utilize a peg that fits standard 5mm holes so even if Warpath isn't using a KaPow weapon someone else can! 

The Saw blade does actually spin when mounted in the holder.  If made in something other than "Strong and Flexible" type materials becareful when putting the saw blade between the mount points.  This way you don't break the mount points!
 
(1)  
  •  
From: $4.00