|| METROTECH MACHINERY || A 1" blade plug for your custom saber. This plug features a distinctive reactor look, with various light holes for an interesting light-up effect. You could mount it all the way inside the emitter, or let it stick out a bit for that sci-fi emitter look. The neck could also be decorated with copper wire*, to finish its coil- like appeal. !FOR WINDOWED EMITTERS! If you have a windowed emitter, make sure the slots of this plug DO NOT line up with the windows. These slots were added to keep costs down, and will NOT protect your eyes from the LED. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech =>|| METROTECH MACHINERY ||

Amaze your fellow saber enthousiasts with PRIME plug! Showing the mechanical insides of your saber, this 3/4" plug is sure to turn some heads. WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A75x-xxx

Unleash the Kraken with the OCTO Insert! Featuring eight prongs, this part is ready to do thy bidding, Captain Jones. Compatible with MBPx-B75x-xxx parts.

|| METROTECH MACHINERY || A 1" blade plug for your custom saber. This particular design features a stacked ring design, held in place by simulated 'armatures'. Underneath each ring there's a cut-out, backlighting the rings for a cool glow. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||

|| METROTECH MACHINERY || Give your saber that industrial look, with this custom bladeplug! Features a grill-like design, with some interesting 'lens assembly' features one the sides, to make it look like an actual saber part. A 1" OD industrial looking bladeplug for your custom sabers. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||

An intricate bladeplug for the windowed saber, this plug is sure give detailed insight into your saber! WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx

With a menacing three-prong design, this Insert will fit your Dark Side saber like Vader's glove. Compatible with MBPx-B75x-xxx parts.

Basic style A 3/4" Base. Use inserts and disks to customise your bladeplug! WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A75x-xxx

A classic finish for a classic saber. The GENERIC bladeplug is modeled after the sabers of old. Compatible with MBPx-A75x-xxx

|| METROTECH MACHINERY || Contain your batteries in style, with this awesome new battery clip! A techy looking AA-battery holder. Holds up to 6 AA-batteries. Batteries are kept in place with an elastic strap*. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY || *strap not included.

|| METROTECH MACHINERY || Go old-school with this aperture blade plug! A 1" OD bladeplug featuring an aperture*-shaped opening, with an additional fan like structure inside for some interesting light effects. Not to mention prevent the LED from blinding you... Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY || *Aperture is not functional.

|| METROTECH MACHINERY || Pump up your saber, with this piston bladeplug! Features 4 pistons supporting the 'emitter', with a gear-like core. !WARNING! When used in windowed sabers, DO NOT ALIGN the slots with the windows. These slots are to reduce cost and WILL NOT PROTECT your eyes. A 1" OD mechanical looking bladeplug for your custom sabers. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||

|| METROTECH MACHINERY || Keep your saber safely locked, with this keyhole bladeplug! Features a fake keyhole. !WARNING! Not suitable for windowed sabers. The various slots are to keep cost down, and WILL NOT PROTECT your eyes. A 1" OD bladeplug for your custom saber. Be sure to check our other designs! http://www.shapeways.com/shops/metrotech || METROTECH MACHINERY ||

Here's your chance to show your sabers inner workings! The MECH plug features a detailed 'lens assembly' design. The space in the core can be used to store your personal lightsaber crystal! Recommended for windowed sabers. WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx

A classic ring design, the ZERO insert gives you a timeless bladeplug that fits with any saber. Compatible with MBPx-B75x-xxx parts.

With a menacing three-prong design, this Insert will fit your Dark Side saber like Vader's glove. Compatible with MBPx-B75x-xxx parts.

Basic style B 1" Base. Use inserts and disks to customise your bladeplug!WARNING: Print in Frosted detail or Frosted Ultra Detail at own risk. May cause blinding when used with High-Power LEDs e.g. Luxeon LED's. Compatible with MBPx-A1x-xxx

A classic finish for a classic saber. The GENERIC bladeplug is modeled after the sabers of old. Compatible with MBPx-A1x-xxx

A classic ring design, the ZERO insert gives you a timeless bladeplug that fits with any saber. Compatible with MBPx-B75x-xxx parts.

The official MetroTech Machinery Insert. The profit made on this insert will be donated to charity. Vote for which charity in the comment section. Compatible with MBPx-A1x-xxx

With a menacing three-prong design, this Insert will fit your Dark Side saber like Vader's glove. Compatible with MBPx-B1x-xxx parts.

Is it an x? Is it a +? Nobody knows! All we know is, it's called the QUAD. Compatible with MBPx-A1x-xxx parts.

Put three sticks in a ring and you got yourself the TRI Insert! Pretend you own a fancy car with the TRI. Compatible with MBPx-A1x-xxx parts.

Keep your aim with the QUAD-ZERO Insert! Featuring a old-school reticule design, this Insert is sure to hit the target. Compatible with MBPx-B1x-xxx parts.

A classic ring design, the ZERO insert gives you a timeless bladeplug that fits with any saber. Compatible with MBPx-B1x-xxx parts.

If 5 is your favourite number, this is the Insert for you. The PENTA insert is a simple ring with five prongs. Compatible with MBPx-B1x-xxx parts.

With a menacing three-prong design, this Insert will fit your Dark Side saber like Vader's glove. Compatible with MBPx-B1x-xxx parts.