SIMPLER VERSION AVAILABLE HERE: http://shpws.me/lmoU have only offered this in the new (and temporary?) FINE ULTRA DETAIL plastic since that would be the only material capable of picking up the fine details in the model.

A recreation of Dr Who's TARDIS. One of my favourite shows as a kid and still shown today, Doctor Who's TARDIS has undergone many incarnations. It seems that season 18's is perhaps the most popular and that is what I tried to remain close to when designing it. This one has no door handles on it, though, simply because I feel the printing process just wouldn't handle the thin material very well (the thickness of the handle was one tenth of a mm). But, in looking at the dozens of incarnations of the TARDIS there were some that did not have any handles, in fact.

The "Police Box" lettering is extruded on each side but I have not been able to put the sign on the phone cover door because of the size.

Sorry - Temporarily (or perhaps permanently) no longer for sale.
A larger version of my 3.5cm miniature available here: http://www.shapeways.com/model/147260/bucephalus_horse.html?
Alexander the Great's horse from ancient history.

Tree of Life Pendant
Click on the video icon above to see a revolving video of this pendant (and do read the below).
Please note that even though I've had this successfully printed in Alumide, whose tolerances are not as good as the Detail materials, I got a message saying this couldn't be printed in Black Detail when someone else ordered it! Grrr!  I have therefore had to remove the Detail materials but do believe the FD and FUD will be okay.

I designed this Paper Airplane Pendant after seeing a similar one that a character was wearing in the movie "Altitude", and have been told that Harry Styles from the music group "One Direction" wears a similar one to this.

 When I created my original Harry Potter Deathly Hallows pendant (seen here: http://www.shapeways.com/model/181474/deathly_hallows_pendant.html?gid=ug) it had a two part bail that allowed the bail to move around. I had it printed but then Shapeways changed the rules for stainless steel printing and now don't allow moving parts in metal. So... I have had to create the pendant with an unmoveable bail as seen here. You now have a choice to buy this one in most materials or the other in the acrylics only. Please see the other model page for pictures of the printed pendant.

From Wikipedia: There are two main styles of a hamsa hand: the stylized hamsa hand with two symmetrical thumbs, and hamsa hands that are not symmetrical and shaped like actual hands.[10] Either hamsa hand can be worn with the fingers pointing up or down.

The hamsa is popular as a charm most often worn as a necklace, but can be found as a decorative element in houses, on key chains, on other jewellery items.[2] Many artists use the image of the hamsa hand in jewelry, paintings, sculptures, wall decorations, and amulets.

The renewed interest in Kabbalah and mystical Judaism is a factor in bringing the hamsa pendant back into vogue. In Jewish mysticism, fish are a symbol of good luck, so many hamsas are also decorated with fish images.

** My Entry into the Co-Creator Contest **
Breastplate armour changed over the centuries from practical life-saving neck and full-torso armour to its modern day incarnation as fashionable jewellery.
Designed to be worn at chest level (hence the name!) this piece could be strung with leather or chain. The official name for this piece of armour was a Gorget.

Note: I have deleted this as a co-creator item due to the large variance in material volume depending on what design the buyer created inside the perimeter. It can now be bought in the design shown and if you have a particular design in mind please contact me.

Green Lantern Ring 9.5

This is modelled with an inside diameter of 19.9mm which should shrink down to a US Size 9.5 during printing: Edit - a customer tells me this prints to 19mm dia. 
Note that the photographed ring is my finished, post-processed ring. You will receive a stainless steel print with no crystal; they are easily obtained over the Internet should you wish.

After Shapeways deemed my first TARDIS miniature too detailed to print - http://shpws.me/lra4 I created this much simpler version. This was at the suggestion of someone who felt that gamers might like this to finish off with paint and/or stickers for the nameplate, etc.

The police box still conforms to the overall correct sizing dimensions as the TARDIS from the (18th?) Dr Who season.

If you want this in 'blue' colour (and why wouldn't you?) I'm afraid Shapeways removed the "Winter Blue" and replaced it with Indigo so you will either get this colour or get WSF and dye it with RIT fabric dyes.

Green Lantern Ring based very closely on the current movie version. 

The centre has a recess in which I have added a green Swarovski crystal (obviously not included if you order the ring here) and is available on Etsy here: http://www.etsy.com/listing/80286595/green-lantern-ring-youth-or-small-size

The ring is small - 14.1mm inside diameter and would be suitable for a youth or someone with thin fingers.

Many other sizes in my shop.

Contact me if you'd like a larger size.

A custom designed soap stamp with a "drawn" Christmas tree image. This was originally designed for someone who hand makes soap, however, I believe if printed in WSF material it could be used as an ordinary printing stamp such as used in scrapbooking, etc. For soap-stamping the circular side can be glued onto a piece of wood to be used as a handle. The tree part can be pushed 5mm into the soap.

To buy this soap please see this Etsy store: http://www.etsy.com/listing/62432718/christmas-tree

A pendant of a surfboard with a large shark bite taken out of it. Photo shows the pendant in Alumide material with the included black rubber-like necklace. Although 7cms in length the pendant is very lightweight.

A slightly thinner version of my Mystic Knot Pendant for use as an earring (you would have to supply ear hoop or stud)

Pendant for cross necklace modelled in TopMod

Looking for that perfect gift for that computer nerd in your life? Now, to accompany my nerdy "They Walk Among Us" bracelet (http://www.shapeways.com/model/152181/they_walk_among_us_____bracelet.html?gid=ug31952) I have designed this pendant. The featured computer binary code spells out the word LOVE...
The inside diameter of the bail is almost 5mm crosswise, but due to the top of the pendant sticking into it the up/down measurement is almost 4mm... so a 3mm necklace will fit inside it.
How about having some printed in the coloured SF material and giving them away as nerdy wedding party favors?

Green Lantern Ring size 12
Green Lantern Ring based very closely on the current movie version.
 Size 4 here: http://www.shapeways.com/model/292373/green_lantern_ring_size_4.html?gid=ug 

A hollow bead-like pendant with holes throughout its exterior shell. String it on your favourite chain for a unique pendant.

Because it's cheaper to get a non-hollowed out model printed in ceramic I also offer this same model hollowed out in other materials here: http://shpws.me/6Mvo
Also have some coloured sandstone models with various designs; just do a search for "flying pig" on Shapeways.

A custom request for a wedding cake topper - one of a pair.

A double heart pendant with MOM embraced in the middle.

A ring comprised of antler horns wrapping around the finger. This one measures 19mm inside diameter making it a US size 9. If you would like another size I will upload one here for you. Smaller will be slightly cheaper. Get in touch at
gslinger at rogers dot com or at my Blog:
www.thirddimensionjewellery.com

One of my series of paperweights available here:
Question Mark: For that pile of papers you don’t know WTF to do with!
Dollar Sign: Well, we all have bills to pay, right?
ToDo: And, of course, we all have things to do. Great for procrastinators!
Checkmark: And sometimes we get those things done! ... Or we approve things
Big “X” And sometimes we just can’t approve of things, no matter what!
OK: Yep, another pile of papers approved
IN: Documents in...
OUT: ...and documents out; unless they get a big question mark paperweight put on top!

Faux Claw Pendant

Pendant based on Asian Mystic Knot design.

One of my series of paperweights available here:
Question Mark: For that pile of papers you don’t know WTF to do with!
Dollar Sign: Well, we all have bills to pay, right?
ToDo: And, of course, we all have things to do. Great for procrastinators!
Checkmark: And sometimes we get those things done! ... Or we approve things
Big “X” And sometimes we just can’t approve of things, no matter what!
OK: Yep, another pile of papers approved
IN: Documents in...
OUT: ...and documents out; unless they get a big question mark paperweight put on top!

Designed for Year of the Dragon, this is a Chinese style dragon (wingless) climbing a tree or column. This listing is for the printed part only and does NOT include the pen. If you wish to you can order them complete from me on Etsy - http://www.etsy.com/listing/92220553/dragon-custom-pen-barrel-hand-painted